Programming Wouxun KG-UV2d
Loading...
Loading...
2:17
Wouxun KG-UVD1P Open All Accessby simonthewizard52,131 views- 0:52
2M band openingby ArkAngelz12,733 views
- 5:00
International Space Station 145.800MHz downlink 29 January 2011by MrEdTraveller24,131 views
- 7:10
Wal Mart Attackby ransum22562,904,860 views
- 5:19
radiotelefon wouxunby PHUINTERSYSTEM5,341 views
- 4:26
Wouxun KG-UV2Dby offthegridsurvival4,286 views
- 4:31
QSO 145,550MHz Wouxun KG-UV2D QTH Rynowo JO73VPby maxthebest686,944 views
- 3:50
wouxun.wmvby portalpmr15,308 views
- 1:17
WOUXUN KG-UVD1(P) modulation mod - get MORE louder and brighter modulationby Radiomix20008,439 views
- 2:16
Wouxun KG-UVD1P Audio Presentationby egalxxx18,090 views
- 0:41
Wouxun KG-UVD1P tesztby stlaker9117,558 views
- 15:30
Radio Test.wmvby m6pcg24,616 views
- 8:58
Wouxun UV3D Reviewby chipperi17,137 views
- 5:37
Receiving AO-51 satellite in Norwayby dofty13,826 views
- 10:00
[Wouxun KG-UV2D] Wideoprezentacja część 1by ebc41sp3,921 views
- 7:54
Review-Wouxun KG-UVD1Pby Thewhislter5,313 views
- 3:30
Wouxun KG-699E programmierenby Betatester116,444 views
- 2:45
Wouxun KG-UVD1p Pilistető - Balatonszárszó 124Kmby tornadolaci9,788 views
- 10:22
Wouxun KG-UVD1Pby Daveicom70619,893 views
i was hoping to get an answer
thanks
dipendraraikut 2 months ago
I want to make my own USB cable for wouxun KG-UVD1 P and i need the pin-out diagrams so that i can connect it to my transceiver. Can you help me on the pin configuration.
dipendraraikut 3 months ago
Thanks for the GREAT video! Just got a KG-UV3D and your video sure made it a snap to program the radio.
73 The Old Gator
THEOLDGATOR1 4 months ago
@ENC016 I read that you have to use a "-" dash or minus sign... but i have not had luck figuring it out. let me know if it works for you.
blewbot 5 months ago
can anyone tell me how to put a space in the channel name? i read it somewhere but forgot where it was or how too.
ENC016 5 months ago
When I look up my arrl repeator directory it would say repeater freq 146.8650 ,repeater input - negative, ctcss 146.2. My question is on the wouxun software. the rx freq, the tx freq, the decode and encode. Where does the arrl info get placed within the wouxun. The ctcss is the encode or decode and is the repeator freq of 146.8650 the rx frq?
laurak59 6 months ago
@ytTaz480 Actually, you might have had to do that com port stuff with the very first software but any newer or updated software you get now, you won't have to deal with all that.I've used 3 different versions of the software and never had to deal with the com port. It takes care of everything on it's own.
ytTaz480 6 months ago
You don't need to go theouh all the extra headache in the control panel and device manager to figure out the com port unless you have major problems or a "read/write failure" and even then, check everything else first, plug seated all the way, etc. But, 99.99% of the time, you will not have a problem. Windows picks the com port as soon as it sees the USB cable and the
Wouxun("oh-sheng") programming software finds the correct com port as soon as you start the software. But good to know still.
ytTaz480 6 months ago
Great vid! Just a comment on connection failed message. I had a terrible time with those failure messages and finally determined it to be the radio end of the cable. A little rubbing alcohol on a cotton ball cleaned it right up. Hasn't missed since.
mickeyzee43 7 months ago
@ClaytonCowboy i've got this one too, I don't know how to figure it out
BlackAdder719 7 months ago