Parkzone Ember w/custom flashing LEDs
Loading...
Loading...
81
views
Loading...
Uploaded by rcAllDayLong on Dec 23, 2011
I salvaged a couple of LED lights from my micro heli and to my surprise the LEDs did not required anything to flash red and blue.
Since it does not require anything, the LEDs themselves are very light. The entire setup with 2 LED's along with the required length of the wires is less than 0.5 gram.
I then decided to put it on my PZ ember so I can fly it at night.
The PZ lipos are long gone, so I am running this one on HobbyKing's 100mah zippy lipo.
A fellow RCG member gave me a site where these blinking lights can be purchased:
http://www.goldmine-elec-products.com/products.asp?dept=1245
- 3 likes, 0 dislikes
-
Uploader Comments (rcAllDayLong)
see all
All Comments (5)
-
This would freak me out so bad if I saw this go over my house at like 11:00 PM!
Loading...
- 3:19
Parkzone Ember 2 Maiden Flight.wmvby Faxx21274 views
- 0:50
Perhaps we weren't meant to fly...by dobarah18 views
- 9:59
Parkzone's RAF SE-5a Review & Build Part Oneby ChuckTSeeker6,524 views
- 1:28
Hobbyking Memphis Belle B-17 Lights Conversionby pomroyj705 views
- 1:21
Ember 2 hours oldby starful65 views
- 5:32
Parkzone Ember 2 Reviewby PowKa1544,928 views
- 3:27
AXN with night flying accessories -nonamerc-by nonamerc144 views
- 0:56
Stryker Cut My Finger - Update - About A Week Laterby earthling198413,720 views
- 6:00
Parkzone T-28 RC unboxing and reviewby TheNZRProductions1338 views
- 5:36
How To Fiberglass - Mold Layupby punk28186500,263 views
- 2:14
ParkZone Ember 2 Low & Slow Flyingby DigitalMagicStudios1,773 views
- 9:07
Parkzone RAF SE-5a The Maidenby ChuckTSeeker16,430 views
- 3:23
Stranded Colorwork - English and Continentalby knitpicks243,267 views
- 5:20
How to make a Duct Tape Bow. [Add to Headband, Hair Clip, Bracelet...]by SoCraftastic78,762 views
- 5:22
Assembling RedCat Big Cessna Part IIIby alishanmao14,970 views
- 4:54
RedCat 500 Class Cessna Maiden Flightby alishanmao23,456 views
- 4:16
RedCat 500 Class Cessna 182 Out of boxby alishanmao14,730 views
- 3:44
Assembling RedCat Big Cessna Part IIby alishanmao11,797 views
- 5:29
ESM Fiesler Storch 93" | TBM Product Overviewby troybuiltmodels10,309 views
- 2:46
Night Flying with the Ember 2.wmvby customeddie71185 views
nice! it's amazing how small these bright lights have become. Great explanation of the lights and they look awesome at night! Thanks for the upload!
Rcflyyer1 1 month ago
@Rcflyyer1 You're welcome! and thanks for watching.
rcAllDayLong 1 month ago
Ok, see how you connected wires to battery but, not to other power source. Is their a cut off switch to turn off and on. And if so, thats the part that I am missing. As I am or will need lighting for the wing that i am building. I think that usually with lighting one end goes to battery and the other end plugs into receiver. Your input will help me to understand better. It may be something that I can scratch build . I just need basic for it. Thank you mr Rc.
coolwaterhubby 2 months ago
@coolwaterhubby In order to save as much weight as possible, this setup has no switch or anything- so basically plug in Lipo and lights go on. If you want to see how to add a switch to lights that is controllable via your tx, check out my vid titled "RC Plane landing light from 9 LED Flashlight". I've edited the description to include the link to the switch. Basically, the switch goes to your tx ch (flap, gear..etc), and your lights hook up to the switch...flip your tx gear on, lights go on.
rcAllDayLong 2 months ago