Yamaha Grizzly Clutch install part 2
Loading...
Uploaded by GRIZZLYRIDERS2010 on Aug 31, 2010
I have uploaded a new version of this install due to an audio issue in this one. It can be seen here...
http://www.youtube.com/watch?v=XmgmLn3RCVk
- 23 likes, 2 dislikes
-
-
-
-
View attributions »
Link to this comment:
Uploader Comments (GRIZZLYRIDERS2010)
All Comments (41)
-
Great job gents very much appreciate your help! Thank you.
-
Wish I would have watched these videos before I worked on my 550 yesterday...I did not see splines when I put the nut back on the primary, going to pull it apart right now and check it (1.5mm shim).
-
@GRIZZLYRIDERS2010 My honda going to be traded in for something with more power ( I like honda but I like to upgrade to something with better 4x4 system plus go more then 45mph lol) Dosn a grizzly go good in water crossing or will I need mods for that? I cross a creek sometimes and it like knee deep and a lot of mud holes around here are like knee deep.
-
@GRIZZLYRIDERS2010 When you put a epi clutch kit on dosn it lose top end speed? And if so about how much? Also nice work on this vid!
- 100 videosTop Tracks for Pantera
- 1:03
Yamaha Grizzly Cutch Install Part 1by GRIZZLYRIDERS20109,164 views
- 9:35
Checking Your Yamaha Ultramatic Drive Beltby 6speeddakota8,697 views
- 0:34
Grizzly 700 transmission video 1.5mm shims installedby soulofskeletor4,761 views
- 4:45
"Why do I need a clutch kit?" By EPIby EPIperformance45,303 views
- 3:36
Rhino Greaseless Roller Weightsby Hunterworks16,747 views
- 2:37
2011 Yamaha Belt Change Tipby sledshot11,903 views
- 0:15
Problem with yamaha primary clutchby kimsnope6,087 views
- 11:10
How to clean out a Yamaha CVT clutchby mccormickchainsaw1,840 views
- 0:44
Can Am 650 vs Grizzly 700by 516sunshine11,329 views
- 5:40
EPI Clutch Kit, Wet spring install part 4 for Suzuki 700 Kinby bdhinks10,858 views
- 4:03
EPI Clutch Kit, Wet clutch install part 2 for a Suzuki 700 King Quaby bdhinks19,390 views
- 3:48
UTV Inc YAMAHA RHINO 660 CLUTCH SHEAVE AND CLUTCH KIT INSTALLATIONby UTVCrap28,047 views
- 2:13
grizzly 700 passes terra-jet in deep waterby offroad50008,261 views
- 1:15
Roughing up the surface of a Grizzly Secondary Clutch Sheaveby TxChristopher1,294 views
- 1:12
Dayco HPX belt in Grizzly 660 explodes with 20 miles on itby videosockpuppet6,885 views
- 5:30
EPI Clutch Kit, wet spring install for a Suzki 700 King Quadby bdhinks11,452 views
- 0:30
Torque Monster Clutch Kit for Yamaha Grizzly 700 and 660by youtrade20762,877 views
- 3:30
Clutch Install Outakes ......NSFWby GRIZZLYRIDERS2010986 views
- 3:47
Yamaha 2011 Grizzly 450 EPSby CornSoybeanDigest8,229 views
this would be more helpful if you could fucking hear what the guy was saying!
junkymustangs 1 week ago
@junkymustangs I guess you couldn't read the BIG BOX Saying to click it and watch the new version? It got stripped so I had to upload a new one. Either click the link in the description or the box at the beginning of the video to see thee new one.
GRIZZLYRIDERS2010 1 week ago
why did you not put on your cover on your primary clutch ? Also what about the wet clutch springs , Just wondering because I just ordered a clutch from epi . Thanks
jralberth 2 months ago
@jralberth Cover isn't needed when converting over to grease-less. The cover is a grease retaining cover. Didn't do wet clutch springs since they are stall springs and I wasn't looking for that. Stall springs are more for mud guys.
GRIZZLYRIDERS2010 2 months ago
For general water crossings a 700 would do good and offer plenty of power and a comfortable ride. For serious mudding or waterholes snorkels would be best for any quad. The grizzly 450 will flood if the seat goes under water since the air box is there. On the 700 everything is higher.
GRIZZLYRIDERS2010 6 months ago
You lose top end normally when you add a shim. EPI makes different kits and they are stiffer stall springs. Every quad is different, I didn't change out the wet clutch springs, but on your honda it is your only option.
GRIZZLYRIDERS2010 6 months ago