Cutting 4x8 Plywood.WMV

I revised the soundtrack on this to eliminate the background noise. See http://youtu.be/5QnETtnYecM
This is a video on how to cut plywood correctly using a saw guide and proper supports. This wood is being used for the cabinet is my man cave {see my video}

Category:

Howto & Style

Tags:

• woodworking
• plywood

[butchschmidt]

The voice over is a good idea, but dry runs are hard when you are cutting wood. Any suggestions for a voice over editor would be appreciated.

[butchschmidt]

Samten10a, Thanks for your comments, I used what I had available and I am a hobbyist, Please show me a video of your set up. My set up yields a perfect cut, how about yours? The sound has been addressed before, it was one of my first videos can I see one of your first videos?

[butchschmidt]

Matti, this was one of my first videos, so I screwed up. Better to have something than nothing, now I know.

[ksmit2]

You are probably an excellant craftsman. When making your video do a mock

up dry run video and review it before making your "final video". The radio was

a big distraction as people couldn't hear what you were saying. If you want

music in your video, you can do a "voice over" video with a simple editor for

your computer. Keep up the good work. Not all good craftsmen are good

videographers.

[swakalitaka]

If you are planing to make a video of wood working at least please do it the right way, clean and safe. Make an out-feed table.

Never walk away form a running table saw blade with material between the fence.What is important is not what you make but how safe you make your cuts and everything. Clearly from this videos, I think it is not a bad idea for you to take some woodworking classes. Believe it, kick back can happens anytime. Take some classes on safety.

[BenYoumans]

Cant hear a thing for the radio.

[samten10a]

Well your saw horse is too tall for that job. They should only be about 24” to 30” tall so you can get on top of the ply to finish cutting it. Waist high if you do not need to make the cuts that are long.

You need to build a 24” to 48” 8’ long out feed table. A In feed table also. Should also work on doing voice over on video and turn with the sound of equipment turned down. Work on scrip of what you want to say.

[Skeebled]

nice video, thanks for the advice, keep it going

[Fondlyours1960]

I'd a waiting till the blade completely stopped before I'd move it.

[Fondlyours1960]

The background noise is distracting.