How to make a xbox 360 power supply with a pc power supply (Part 1)

How to make a xbox 360 power supply with a pc power supply Part 1
Sorry about the way i sound... like a fucking douche bag yes i will say it before all of you


Need:
Soldiering iron
250 watt pc power supply
faulty xbox 360 power supply
wire striper
screw driver
soldering skills
pertinence and carefully listing

Procedure:
1. Take the faulty xbox 360 power cable and cut the end that connects to the xbox 360 (cut as close as you can to the brick)
2. open the pc power supply, take everything out mother bored other components out
3. Cut the colored cables out about half way
4. youre gonna want to unsolder out every colored wires EXPECT THE GREEN ONE
4A. How to: you take out the wires buy placing youre hot soldering iron on the wires solder point on the back of the board untill the solder melts and you simply pull out the wires
BE CAREFUL! (make sure you remember what color wires goes to what holes.. this is very important dont forget or make sure you lable it!
5. Make sure you have about 3 inchs of exposed wire of the xbox 360 power cable. solder each wire in the correct hole.
6. youre gonna wanna add a extra GROUND BLACK cable into the ground holes. (where the xbox 360 black wires went into.)
7. strip the black wire hanging out... now strip the green wire and connect both the black and green wire together and add a little solder and place a piece of electrical tape to make sure theres nothing exposed
8. Add hot glue or thermal glue to the wires to hold them down mmore... to loosen the stress on the solder joints....
9. put it back together and you're good to go...



Questions or comments message me!

Category:

Gaming

Tags:

• How
• to
• make
• xbox
• 360
• power
• supply
• with
• pc
• xbox360
• mods

[zombieback]

I got a window XP is that go enough for the xbox

[vinnnnnnnnyyyyyyyy]

@zombieback you have a Windows xp computer to take the power supply out of it?

[vinnnnnnnnyyyyyyyy]

@st3roidz1 Thanks dude, i cant wait to see the video! feel free to message me, it goes to my blackberry so i reply quick. Im working on a xbox mod my self ill let you know how that goes.. Best of luck to you!

[st3roidz1]

@vinnnnnnnnyyyyyyyy Thank You! the reason im asking you these questions is because im currently working on a Xbox 360 that i am going to put into a Desktop Case and i wanted to power it using the power supply. If it all goes well i will be posting a video and ill give you some credit as well. Thank You for the help man!

[vinnnnnnnnyyyyyyyy]

@st3roidz1 you can, it will prolly have problems where it will just shut down from over heating.. i tried it and it will play for like hour and half and shut off from over heating.. but you can... but a quick tip, if your ATX PSU has a green wire connect the green wire from the xbox power cord to the green wire coming from the ATX PSU, but if not you will have to connect it to the ground..

[st3roidz1]

@vinnnnnnnnyyyyyyyy Also, is it ok if i just strip the wires comming out psu and strip the wires on the xbox cable and join them? opposed to desoldering and reconecting?

[vinnnnnnnnyyyyyyyy]

@st3roidz1 yeah that will work

[st3roidz1]

@vinnnnnnnnyyyyyyyy yes acutally srry i just checked....it also says 100v-120v @ 9amps is this good?

[vinnnnnnnnyyyyyyyy]

are you talking about volts or watts

[st3roidz1]

I have a 305v power supply is this project still compatible?

Thanks!