HAAS 4TH AXIS MACHINING

HAAS MACHINING CNTR MACHINING PARTS ON 4TH AXIS (THINKING OUTSIDE THE BOX)

Category:

Entertainment

Tags:

• HAAS
• CNC
• 4THAXIS
• MACHINING

[TODDX3]

well if you look close the slab cut is on a 4 deg angle so milling on the z axis would not work, and i like to use a cs for spotting holes especially when 82 deg screws are to follow. as far as coolant , this mini mill has a fine screen and will plug up if u do and really is not necesary if ur only runnin 40pcs. just my .02

[TODDX3]

delrin

[ydna2]

Don't be so critical...if you're not doing high production then nobody cares about the absolute shortest method to get the part makde. There's ALWAYS a faster way.

[JAROSLAVAGINA]

@captain2231 i was just thinking delrin. could be nylon too though.

[thchris]

POM

[IH8WRONGPPL]

programmers that criticize the most, usually screw up the most lol.... fwiw tho, i would punch somebody in the back of the head if i saw them using coolant for this job.

[mikem494]

Woo hoo! Glad your thinking "outside the box"--the CNC machines I use ( max weight 30,000 lbs) make this look like a joke. Good if your working for Mattel.  I agree with the other dudes this part took forever to do, too.

[par4par72]

Adjust your milling speeds and feeds...part took way to long!!! rough cut in "Z" position then clean with side mill. also spot with a 45 deg and you wont have to second op the lead in thread chamfer! And you got a problem with coolant? even with delrin its soft but abrasive...plastic is very abrasive, use coolant!!!

[captain2231]

delrin??? or nylon??