Festool Vs 600 a Brief Intro
Loading...
Uploader Comments (joefusco1960)
All Comments (8)
-
Nice description. Well delivered. Something that I have discovered works a little better than parafin wax is the Johnsons paste wax. it doesn't tend to gum up as much on the work surface and makes for a nice smooth work surface. Great description and demonstration.
-
Joe Fusco passed away last year. His videos remain as an inspirational legacy. Thanks Joe!
-
will have an astronomical prize
-
@joefusco1960 great i finally got the 1400 next the jig! do you have to buy a load of
copying rings or do you just need 1? what size is that you are using great video!
-
Amazing.
-
At about 3min 42 sec there was a not nice sound as some of the wood chipped. The machine seemed to almost stall at one point making me think using the of 1400 would be more suited. The jig looks great. I got the leighs jig but watching this I see you can flip the jig up. Lifting the router before the machine stops is bad practice. Let it stop then remove from work piece. I know I have done that too.
Can the jig do through dovetails? I like the support keeping the router straight.
-
Where can the jig be purshased?
1:57
VS 600 Router Setupby joefusco196015,494 views- 10:02
Shelf Pins & the Festool LR 32 systemby joefusco196053,675 views
- 8:20
The Basics of Cabinet Making Part 1by joefusco1960437,849 views
- 9:23
The Stickley Storyby SheffieldFurniture66,533 views
- 2:29
Building Dovetail Drawersby mhuberarchitect40,595 views
- 2:27
Messageboard Grinderby MrSrslySirius1,153,760 views
- 2:15
Trend CDJ300 Dovetail Jigby TrendMachinery172,232 views
- 1:52
The Folding Rule - Festool Domino Bench Aidby USNERDOC72,475 views
- 2:31
Table Saw LS Super System from Incra Presented by Woodcraftby woodcraftmarketing98,229 views
- 6:58
Leigh Isoloc Hybrid Dovetail Templatesby LeighIndustries76,181 views
- 7:16
FESTOOL KAPEXby tooltechnic169,150 views
- 9:07
Trend DC400 Dovetail Jig - Drawerby TrendMachinery9,595 views
- 2:52
Morsy z Ełkuby excelencja95,649,896 views
- 1:25
DIY Track Saw (comparable to Festool and Dewalt)by maacsamja112,143 views
- 2:52
Leigh D4R Dovetail Jig summaryby LeighIndustries28,773 views
- 2:09
FESTOOL MFT/3by tooltechnic38,281 views
- 3:54
Festool OF 1400 Router Demonstrationby JamestownTV67,465 views
- 3:56
Rockler Presents Festool OFS 1400 Plunge Routerby RocklerWoodworking40,619 views
- 4:40
Festool parallel guide and LR32 guide rail used as a jig for 32mm panelsby shofestoolusa18,074 views
Any Festool Dealer or at Festool.c o m
joefusco1960 3 years ago
You can always talk more about Festool and their products at my forum:
w w w.constructionforumsonline.c o m
joefusco1960 3 years ago
It's a 1010 router, but you can use either.
joefusco1960 3 years ago