Flexible Arm Tapping Machine M5 to M16.VOB

Electric Bent Arm Tapping Machine ( SLIDER)

Jin-Shaa Machines is now introducing a new concept of tapping machines ,namely the Electric Bent Arm Tapping Machine. These machines are compact light weight, and have a massive reach . Model shown in above photo has a horizontal reach of 1250 mm in 360 degress, and a vertical stroke 150 mm and a clearance of 300mm from tap to mounting face.

These machines come readily supplied with Taco make reversible tapping attachments, so there is no need for operator to reverse motor for tap extraction after tapping.

Feed lever seen in photograph is used to pivot the tapping head .For tapping feed lever is pressed downward on completion on tapping lever is released due to spring loading lever returns and tap also starts to return at double speed. After coming out of tapping hole tap again changes direction to forward

These machines provide a cost effective solution to costly tapping operation on VMC where by Tapping operation is done on this machine thereby saving costly VMC machine hour rate. Also operator idle time during VMC operation is utilized.

Available in pure vertical or horizontal models


Technical Specification

Tapping Capacity:
Model 1) 5 mm to 12 mm steel / Cast iron

Model 2) 8 to 16 mm in steel Cast Iron

Motor Rating : 1250 watts single phase M/s Jin-Shaa Machines 83/10 Rahul Apts law college Road Erandwane Pune 411004 Contact : Sudarshan J Patil cell no +919890272996. Please visit at http://jinshaa.en.ec21.com/

Category:

Science & Technology

Tags:

• Manufactured
• By
• Jin
• Shaa
• Machines