IR Laser (from cd_burner) CNC 2
Loading...
Uploader Comments (Fredasp)
All Comments (20)
-
@Fredasp Ok thanks. I though do i save and use those lens which i still have. :)
-
@nianzasur Watch Kipkay, he makes how to make a burning laser videos.
-
very good job, how do I make one? you can teach me? you can send a Leap or something?
Thanks from Uruguay
-
@MasterCollingwood cutting metal with a laser is alot more violent theres sparks and all that fun stuff
-
very kool! I was reading over the comments to see if there was anything else I would need to get a rig like this setup. mainly the laser section of it the rest is pretty simple. is a capacitor required or would 112mA - 105mA of power be sufficient? Hope you're still checking back on this.
-
Looks great!
Use the spindle on/off m-codes and an output from the cnc to turn the laser on and off. That way you can control the laser right in the part program.
-
You ought to set it to shut off the laser instead of raising the head. You don't really need to raise the head. Of course it depends on the software you are using. It's pretty easy with EMC2, dunno about others.
3:40
DVD Burner IR Laser 780nmby MarcantonioA10,299 views- 5:13
Home Built 30 Watt Laser Tableby baccus61600,109 views
- 0:37
Eje Z para Laser CNCby sjetinetorg21,479 views
- 5:27
Inside a DVD Drive and its Burning Laser.by empireravenshadow5139,819 views
- 3:08
CNC DVD BURNER LASERby MarcantonioA11,659 views
- 1:13
diylaser module from a 16X dvd burnerby 05guyver173,905 views
- 1:28
250mW 780nm IR laser @ 6000ftby clampmaster14,550 views
- 0:52
IR laser from DVD burnerby mawaii189,975 views
- 0:45
CNC engraving flower of door 木工雕刻機工藝by chaostec101,635 views
- 0:33
IR laser paper cutby rvs00335,188 views
- 3:29
DIY CNC Laserby hack33544,494 views
- 0:26
laser z CD-RW zapaluje 6 sirekby danyk66624,316 views
- 1:40
More DIY Laser cutter actionby Donenotperfect34,248 views
- 1:09
Homemade Infared (IR) Burning Laser pointer 150-200mWby Robertopiras9,381 views
- 2:40
Homebuilt CNC Laser Cutterby SuperAlmac8,007 views
- 1:47
3 axis CO2 Laser CNC Machineby manycnc84,749 views
- 0:43
Mini CNC X/Y table from CD Drives 1by sparktronics78,953 views
- 2:11
Homemade DVD Burner Laserby FrigginSmift491,080 views
- 2:02
CNC laser cutting...from my workby sunildmalekar73,002 views
Did u use any kind of optics? Lens...
XantheFIN 1 year ago
@XantheFIN sure! I used the lens used to focus in cd/dvd. simple and eficient.
Fredasp 1 year ago
is this burning into plastic or metal?
MasterCollingwood 3 years ago
It´s burning/melting plastic. =]
Fredasp 3 years ago
Why it is inaccurate?, i mean, at the end it always moves a bit...
javierdarosa 3 years ago
The incaccurate comes from my hand... I´m turning on / off the laser... when the CNC stops in a point, the laser should be off, and I (all we) have a delay to see it. so... :p tnks to watch!
Fredasp 3 years ago