Skywalker Maiden Flight
Uploader Comments (letmeplaymystrat)
All Comments (30)
-
Nice maiden flight,
-
@RIPcombat Thanks for the prop advice. The 9x4.5" brought my average amp draw down to about 10 amps. I was able to get a good 30 minutes on the 3s 6000. Odd thing is that I really didn't notice much of a decrease in top speed.
-
@letmeplaymystrat The skywalker will fly very nice around 25 to 30 mph that will give you more fpv flight time at around 7 to 12 amps
-
@RIPcombat I tried a couple of props and it looks like the 9x4.5 might be a winner. Brought my max amp draw down to about 26 amps. Still feels like it has a good amount of thrust, although I haven't flown it yet.
-
Great video.
I'm waiting for a Skywalker. My next additions for the plane will be the Ardupilot Mega and Oil&Pan with GPS in order to achieve autopilot and Return To Home. Like you I don't want to lose my future plane.
-
@RIPcombat That's a good idea, Easier than changing the motor and loading up on 4 cell batteries. I'm going to pick up a couple of extra props tomorrow and check them out. Thanks for the suggestion.
-
@schraut5 No, not yet. Since I switched to 72mhz I think I can get plenty of range for my immediate flying goals. I think with the range limit of my 200mw video, the 72mhz is more than enough. I think my next additions for the Skywalker will be the FY31 autopilot and a pair of Fatsharks. Mostly, I am hesitant to venture out too far without the autopilot with Return to Home. I really don't want to lose this plane.
-
Awesome! Looks like a great flyer? Did you get a DragonLink system?
-
@letmeplaymystrat Try a 9''x 5 or 4.7 apc park flyer prop alot more trust at low speeds
5000 mah and when in parallel up to 10,000 mah with 40min + flight
BankheadRC 1 month ago
@BankheadRC Thanks, I think before I replace the motor, I am going to try a couple of different props to see if I can get the amp draw down a bit.
letmeplaymystrat 1 month ago