Orientech - Rivet Feeding System

We have conceived the system to be the most valued by the operators of semi-automatic and automatic riveter.

Our machine is suitable for all rivet sizes and fasteners used in semi-automatic or automatic riveter including uncoated, coated, square, less than square, and hi-lock rivet.

It is mounted on a rugged welded chassis. Four vibratory feeders with integral orientation systems and escapements feed the rivets to the transfer tubes. The system can feed rivets from 1/8", 5/32", 3/16" & 1/4" in diameter with a length of 1/8" up to 1-1/4" long. If a fifth rivet must be fed, the bowls are quickly adjusted using convenient set up gauges. From the transfer tubes the rivets arrive at the propulsion unit that feeds the rivets directly up to the injection head, which in turn feeds the rivets on demand to the riveter anvil.

The feeder system controls have all the electrics and pneumatics components, including a separate operator control panel installed within easy reach of the operator. If a change over is required for different rivet sizes, the operator can interchange the injector head tooling at the same time as the change over the chuck of the riveter anvil.

This system is compact. It can be located next to the riveter and moved from riveter to riveter as needed. This system is supplied with a convenient cabinet for the safekeeping of tooling and operator tools.

Category:

Science & Technology

Tags:

• Orientech
• Rivet
• Feeder