1982 chevy truck with 292 cam

1882 chevy truck with a 292 cam in a 305 engine,now the truck has a 400 s.b. headers,racing flows.b&m trans shift kit and parts 4.11 posi, new 50,s tires, 11 inch wide rims, lower a-arms,lower rear, bed linner and cowl hood.will post it soon.

Category:

Entertainment

Tags:

• 1982
• chevy
• truck
• with
• 292
• cam

[1968budchuckhill]

We put a 292 cam in a 305 to prove that it will work .The oher engine after we flammed it is a 400 small block with an rv cam.Right now the FLAMMED BEAST has a 400 small block with a mega cam,victor jr intake, edelbrock carb,411

possie with racing slickes,and will have one of my trannies,one is a b&m 350 turbo with a 3500 stall The other trannie is a built powerglide with a trans brake whit a 3800 stall. and will be finished in a few days coming to Utube very soon.Will be under 82 chevy truck

[1968budchuckhill]

We put a 292 cam in a 305 to prove that it will work and do the job.The oher engine after we flammed it is a 400 small block with an rv cam.Right now the FLAMMED BEAST has a 400 small block with a mega cam,victor jr intake, edelbrock carb,411possie with racing slickes,and will have one of my trannies,one is a b&m 350 turbo with a 3500 stall The other trannie is a built powerglide with a trans brake and will be finished in a few days coming to utube very soon.Will be under 82 chevy truck

[MrShortbed83]

dats not a 292 cam buddy

[crystal4710]

sounds stock to me

[cowboy211100]

runnin a little rich there bud. might want to turn the gas down or try a 600-650 holley. 750 is far to much for your cam. if you want to get serious try comp cams xe284h 294duration 588 lift cam with a 750 holley, with a highrise, which is what i have in my truck. might want to write back the people that sent you the cam and tell them you got powned, this is not a 292. if so you'd be in the 611 lift range and about 310 duration.comp cams can custom grind you a cam that fits all of your desire.

[BlAzEAtF777]

Nice truck man ... lil by lil i know chevys are good project... idk but i got an 88 2.8 blazer in the works but i aint ganna engine swap ima bust a full blown on my shit

[Z7EXTREMEBABY]

Timing is retarded too much , and idle with that cam would be @ 1000 rpm , u put it in drive and die

[Bajaheat]

@1968budchuckhill what all did you have to do to run this cam?

[jay35088]

Great sounding engine

[GOSH454]

Factory dual trans ......:)-

[IrishmenV8]

put some headers on there and u will gain prolly around 20 horses and it will sound much better!

[papabugs71]

Damn son. A 292 bumpstick & you're sporting factory exhaust manifolds?

[Ipwnweniwant2]

VACUUM LEAK FTL?



[dirtrokker4]

Everyone bashing the 305 is speaking in respect to a 350. Saying a 350 with the same stuff will perform better than a 305..... Well, NO SHIT! Beyond shrouding, you are talking 45 more cubes. And guess what, a 421 sbc will out perform a 350 or 383. Getting beyond the obvious, there is a 305 sprint class here in PA and those cars run bad ass. you can definitely, with some work, make a 305 kick shit!!