This is made by LASCAR. Available at:
http://www.newark.com/jsp/displayProduct.jsp?sku=36C2804&CMP=KNC-Y-SKU-OTH
Drill a 1/4" hole in the cabinet for the LASCAR hollow mounting shaft. Then on the back side drill a large hole that allows you to tighten the nut with a socket. I used a 9/16" drill. Drill this large hole through from the back side using a drill bit stop so it gets close to breaking out the front side but stops just short of breaking through - leaving about 1/8" of wood will work out fine.
The Euro style terminal strips are sold at Radio Shack or better electronics stores. They come about 4"-6" long and you cut off the length you need. Attach with screws or HD double stick servo tape from a hobby shop.
Link to this comment:
All Comments (0)