R6 Flush mount signal install

Installation of flush mount turn signals RAW GADGETS

Category:

Entertainment

Tags:

• Do-it-Yourself
• Install
• Installations
• Gadgets
• Flush
• Mount
• Turn
• Signals
• Motorcycle
• Street
• Bike

[MrFaberjr]

Hey, you been given some good feed back and its pretty spot on, I'm thinking about running some Audi/Angel Eyes type lights on my bike. Can I tie those lights to my running lights such as the running turn signal. Can I run extra lights off that one source(the running turn signal)?

[rawgadgets]

@MrFaberjr

Audi lights only have a Neg and Positive wire. So yes you can. Can make them

solid on when you cut the bike on, by switch or remote. Or you can tie them

into your Pos and Neg wires of the signals. You u know how to wire relays, You can make them running and flashers!

Gadget

[MrFaberjr]

@rawgadgets

Thanks, for infor and the timely response, I really appreciate it. One last thing to pick your brain about....

I haven't personally wired any relays, but I've seen a few wiring diagrams. I'm all ears if you got any pointers. Also, I was wondering if you think I need drop fuse in the line as some added precaution?

[rawgadgets]

@MrFaberjr

You should be ok if adding a couple of lights. Anything more serious

then we would adjust the amperage of the fuse! Good Luck

Gadget

[mohammedali]

i have cbr f4i. the factory flasher have 3 wires but my flushmounts came with only 2. after installation, the flashers work fine except for the fact that beside my speedometer, the turn signal lights stay on. They weren't on with the factory. Anyone can help me out here?

[rawgadgets]

@mohammedali

Ok....The 3 wires were (Gnd, Runner, Signal). You have the running light tied

in, instead of the signal. The hot wire of the 2 connected need to be removed.

Connect the one you didnt use up. Nevertheless....start with the wire you no is

ground....put it aside. Then put the signal on for the side.....use a test light to

touch the 2 wires left.....use wire that flash the light!

GoGo Gadget

[MrFaberjr]

@rawgadgets

Thanks, I appreciate your help and sharing your knowledge.

[mohammedali]

@rawgadgets ok i will try it! thanks a lot for the reply!

[rawgadgets]

@SportsSavage

Every bike is different.

[cleggaham86]

how about on a 2004 zx12