Outrage 550
Uploader Comments (MecosHeli)
All Comments (10)
-
Nice video all around. The 550 rocks. I've had it on my list since Heli Invasion in 2009. Thanks for sharing.
-
The SWE main blades are Carbon, the stock tail blades are plastic.
The kit itself is G10 Fiber.
-
Fiberglass or carbon?
-
SWE Main Blades and stock white tail blades.
Both the NEU and Scopion motor are good for this Heli. The NEU has more power overall, runs a bit cooler But costs a lot more.
-
What main and tail blades? How is the Neu compared to the Scorpion? Thanks for your reply.
-
Current Setup:
ESC =Castle Creations Phoenix ICE 100. Gov off. Fixed End Points with curve.
Motor = NEU 1907-1Y (using 12T pinion) Head Speed 2250
BEC = Western Robotics Hercules BEC High Current set at 5.3 V
Cyclic servos x 3 = Futaba BLS451
Gyro = Spartan DS760
Tail Servo = JR8900G
LiPo = 5000mAh 25C 6S
For electric helis, if you can control throttle directly with throttle channel, why do you need a gov? can you do mild 3D without a gov? i only have a 6 channel radio and am thinking of moving up to a Outrage 550 or Trex 600 or 700 esp and wonder if I need a 7 channel radio.
pi3k 1 year ago
@pi3k
I do not use gov mode myself. I use the radio settings for a throttle curve. You do not need a gov for 3D flying. And yes you can use a 6 chanel radio for these sized helicopters. I started with the DX6i and later got the DX7se.
MecosHeli 1 year ago
Great vid... kudos to your camera guy as well.
dolbydarma 1 year ago
@dolbydarma Thanks,
I am hoping to make a few more this season.
MecosHeli 1 year ago