Installing a Heading Hold gyro
Loading...
Uploader Comments (GaryGraham66)
All Comments (6)
-
Hello! Ive been wanting to upgrade my gyro to a head holding gyro and I have a EK2-0406G radio like you in your video. Please let me know what brand and model that is, if you dont mind it would be very helpful! :)
Im just not sure how to tell if a gyro will work or not with my radio because I did buy a head holding gyro awhile back(EK2-0704B) and it did NOT work with my radio.
If there is anything you can do to help I would be greatly appreciated!
Thanks again!
-
Thanks, Gary. Your suggestions on finding the best orientation for the gyro eliminated a lot of confusion for me. Cheers!
-
An align RCE500 gyro should do - only £25 with a cheap digital servo should take you to about £55 in total
-
Good vid mate, i'm thinking of upgrading my std esky gyro on my belt cp to a hh gyro. Not really keen on forking out nearly £100 on a futaba gy401, any sudjustions would be great?
8:37
Tutorial Gyro - Parte 1by alvaromenezes14,418 views- 1:27
Gyro adjustmentby Baschgual38,198 views
- 3:37
Adjusting the Cyclic pitch RC Helicopter 620SE Carbon.by SurianoSales11,834 views
- 0:54
HobbyKing 401B AVCS Digital Head Lock Gyroby MrChefpilot25,942 views
- 6:21
RC Helicopters Beginners Guide Part 9 Gyro Talkby alishanmao40,374 views
- 0:56
Trex 450 SE Clone: 1st Spinupby r6stu6,619 views
- 0:38
CopterX 450 SE v2 gyro 401 setupby bazathome200214,710 views
- 8:31
Trex 450 SE V2 how to build the kit.by GaryGraham6697,431 views
- 1:36
Esky Honey Bee King 2 with Align tail sliderby fg197250,770 views
- 1:16
Futaba GY520 Gyro w/Heading Holdby hobbico10,232 views
- 4:25
rc helicopter flying lesson 1, what you need to know before you can fly great 3Dby dannylightning19,812 views
- 1:31
Esky Honey Bee King 2 Heading Hold Gyro Demoby fg197211,386 views
- 8:58
Basic Collective Pitch setup using a DX6i part 3by nuttcaze62,620 views
- 2:17
GY-401 Tail Setup (with subtrims)by MikeG493616,280 views
- 6:37
Spektrum DX7 Programingby greatplanes969,659 views
- 7:40
DX6i & CCPM Full Setup Guide Part 4 Gyro & Tail Servo Setupby RcHelpDotCom6,813 views
- 1:40
RC Heli Gyro Testby mnorbert176,665 views
- 5:16
Helicommand set up part 1by GaryGraham6645,209 views
- 2:07
T-Rex 450 se v2 Video Build Logby skipjack8617,044 views
its an esky 0704b
imprint2finished 2 years ago
power up in heading hold mode (led on) switch to rate mode (led off) if you have a lazy susan or test rig put it on that, if not then training gear and the heli on a smooth surface. power up heli and adjust tail servo until heli stays stable, ( if the tail moves to the right move servo towards body, to the left move servo to tail) then you're done. power off and the gyro should keep the tail in HH mode.
GaryGraham66 2 years ago
Gary, any solutions to may rudder servo it keeps creeping! i've already adjusted the servo and tx it just wouldnt hold steady on HH mode. Thanks mate, nice informative video for newbies like me.
imprint2finished 2 years ago
Hi which gyro is it? pm sent.
GaryGraham66 2 years ago
Heliguy do a one for the Falcon 3d for £27.99
sturdier than the skya and fits the belt nice.
GaryGraham66 3 years ago