Behringer iNUKE NU3000

Just got a new amp. It's the Behringer iNUKE NU3000. This is a Class D "Digital amp". Video is 1st test with two 18" sub woofers and Peavey PV215. So far my test results are good with this amp.

Category:

People & Blogs

Tags:

• Behringer
• iNUKE
• NU3000
• Numark
• M2
• Peavey
• PV215
• Digital
• amp
• Class
• amplifier

[kevinmcahill]

I am also interested in the comparison to the VLP 1500. I see the specifications, but the question is which amp are you happy with to run the subs. I think the VLP1500 has loud fans and if the iNuke is cooler, quieter and sounds as good then I would go that way.

Thanks!

[deejaybustab]

@kevinmcahill The amp which I am happy with running my subs now is the NU3000. The VLP1500 can't be bridged to run at 4 ohms, it can only be bridged and run at 8 ohms. I like running my subs in parallel which will give the amp a 4 ohm load. When I run my subs, I place them side by side so you can get the 3db of more sound from them. The VLP1500 is still a great amp and I still use it to run my PV215s.

[EntertainmentEnzo]

I noticed you've had this amp for a while, and i imagine you've been putting it through its paces.. Hows it holding up?? Im curious to know because of all the bad reviews ive read.

[deejaybustab]

@EntertainmentEnzo So far so good. I don't know why people are having problems with this amp. I used it this past Saturday and pushed it hard with my two 18" subs for about 6hrs without any problems at all. Just all clean sound & no clipping. Pulls so little electricity to run. I don't know if people just don't know how to hook up PA gear or how to adjust audio for proper sound output. I have no complaints with this amp.

[EntertainmentEnzo]

@deejaybustab Whats the Factory warranty? Im somewhat new to Hooking up PA Gear but Im trying to find the right amp for my subs. Would you recommend running the NU6000 with two JBL MRX528s Subs?

[deejaybustab]

@EntertainmentEnzo I think the factory warranty is like 1 year but I could be wrong. Were you talking about running 2 JBL MRX528 cabinets? The NU6000 may run them in 2ch mode which is 3,000w x 2 @ 4ohm but I can't be certain it can. You may want to call Behringer tech support 425-672-0816 and ask them. They are west coast and every time I called, the techs knew their stuff. Hope this helps.

[FosterWood1878]

BEST PROMO is.gd\mj52Op

Car Video

Behringer iNuke

The iNUKE NU1000 Rackmount Stereo Power Amplifier (150W\Channel @ 8 Ohms) from Behringer offers high-quality audio and excellent efficiency in a compact and durable design. The amplifier has an ultra-lightweight and sturdy 2RU metal chassis that fits into any standard equipment rack. It can operate in stereo, dual mono, or bridged mono ...

For more details please copy the Amazon link below in your browser:

is.gd\mj52Op

[TheRockerxx69]

Are you using it in mono ??? I see only one speaker cable out...and only one cable in. Cant you make an open air test with mixer.????..real cds ..no mp3!!! just source mixer...power amp...and two full range speakers...no subs !!!

[MrFranky69ers]

@SuperErin21 You all shoud go on the Behringer's site & download the pdf spec ov the amp that shoud solve a lot ov questions & misunderstood. for the inuke3000 820w ch is for PEAK=20milli second or so at 4ohms. RMS power is 620w ch at 4 ohms (stereo).

[MrFranky69ers]

@deejaybustab Hi! I just buy a nu6000 and the power specifications are a bit lower then that. Its 1100w ch at 8 ohms (RMS) & 2200w at 4 ohms (RMS)... nothing about paralelle or bridged is specified. but i gotta say that the fan suck all the dust inside so think about adding some kind ov filter on the back.

[ulbda]

I have a INUKE NU3000 it is perfect, we only have problems with spare parts here in Brazil