How to Install Bi-Xenon HID: Honda Civic 1992-2002
Uploader Comments (XenonSupply)
All Comments (113)
-
which one is the green and purple?
-
Are these road legal?? Will they blind other drivers on the road when I install them in my civic??
-
@Mnight069 You can buy a slim ballast.
-
@dgaleno2012 then its because of a loose or broken/frayed connections
-
@H20MarkVIII they were on the car already i have like a month with him. i didnt move the wires i just saw that one didnt turn on on a raining day when i got close to a car and only saw one light. i checked later on moved the little motor and each side i manage to turn it on now that one stays on but the other one has the problem that turns off when ever i accelerate
-
@dgaleno2012 Your battery could be low on voltage(needs replacement), your alternator isn't putting out enough power once you rev it(headlight will turn off when you rev it in neutral ) or you didn't properly install the wires
Most likely thing would be that you didn't ground the ballasts properly, take the connections to the car body off then grind the paint off till you see shiny metal and reconnect the wire. You may want to put electric grease on all exposed wires to protect from corrosion.
-
hey i have some similar to this. when every i am in gear and accelerate one of my lights turn off what can it be?
-
Is there a noticeable difference in the low/high beam conversion kit. Rather than just the low beam kit? I could see the "flicker" when you turned on the high beams. But not much of a difference in the lumens. Maybe its just the lighting in the video. Also will this kit fit an 02 ep3 hatchback?
-
fantastic DIY
thks
I recently instilled an h4 bi xenon kit but when i tried to turn on the lights, didn't work
Ge0vone 3 months ago
@Ge0vone Was this a XenonSupply purchased product? If so, please contact the XenonSupply technical support department at Help(at)XenonSupply(dot)com or visit us on the web and create a new issue ticket using the contact form.
If this is not a XenonSupply HID kit there is not much we can do to assist beyond recommend a different product. Not all HID kits are the same and price does make a difference in quality and performance.
Good Luck,
-XS Team
XenonSupply 3 months ago
i have a 2000 ex and theres is no room for the ballasts unless you take out the headlight and put them under it :( Any suggestions?
Mnight069 10 months ago
@Mnight069 You can opt to purchase Slim ballasts which are half the thickness of the Standard ballast shown in the video for easier installation.
You can purchase online at XenonSupply(dot)Com or contact us at Help(at)XenonSupply(dot)com
XenonSupply 10 months ago
do i need to connect them to my battery???
Galindo2012 10 months ago
@Galindo2012 In order to install the BI-Xenon system you must connect the harness to the positive terminal of the battery for power. If you chose to install a single beam low beam only system, you can bypass this requirement and pull power directly from the headlight connectors. If you have additional questions, please email us at Help(at)XenonSupply(dot)com.
XenonSupply 10 months ago