EMD 2 stroke locomotive diesel engine
Uploader Comments (madboymax)
Top Comments
-
@CLENCHEDCURVE74 they dont have intake valves is what your trying to say right?
Video Responses
All Comments (141)
-
10H version please!
-
was it loud
-
This sound likes sound of 10D100 diesel)
-
@Bergsmyntan - Two stroke diesels have exhaust valves at the top and intake ports at the bottom of the cylinder. The piston uncovers intake ports at the bottom of the stroke. The air supply is pressurized by the super or turbo chargers and flows into the cylinder displacing the combustion gasses out through the top of the cylinder. The exhaust valves close, the piston travels upwards with compression igniting the fuel and starting the cycle over.
-
Isn't that a four-stroke engine? There are valves there.
-
@josippetrlic it still confuses me, in a petrol 2 stroke there are no valves as sutch, and the petrol/oil mixture is forced onto the top of the piston by crank case pressure just after the piston has released its exhaust through the outlet port withch is higher in the cylinder., shurley if it has an exhaust valve it has to lose a firing stroke to release the exhaust gasses, im not being funny im curiouse as i dont understand.
-
@danwat1234 This engine works on high volume low pressure.2 strokes all work this way. At idle they are at 10-15 psi.
-
@jerry91a see my vids to learn herbs like kelp,kale,dandelion,coriander,
cayenne,pine,maca etC! -
not sure on boost but around 330 low idle and 1020 to 1040 high idle and around 3400hp + or - depends on if its blower or turbo and injectors and is its a 645 or a 710
-
@danwat1234 theres no oil spray because emd runs a high flow low pressure system so at idle it has very low pressure like 5psi, on the 710 emd engines i'm told by emd any pressure at idle is good
Bit ticky have you set all the hydraulic lifters?, EMD 645 ? blowers or turbo? looks nice ,has it had a rebuild the oil looks clean
58Vulcan 1 month ago
@58Vulcan EMD 645 roots blowers, first start after rebuilding the engine still needs tune up
madboymax 1 month ago
how many cylinders is that? 8?
PlatniumProductions 1 month ago
@PlatniumProductions V16
madboymax 1 month ago 3
HŽ 2062 ;)
josippetrlic 1 month ago
@josippetrlic Turner 102
madboymax 1 month ago