slant6dynoM2U00022.MPG
Loading...
Uploader Comments (MrTrippleT)
All Comments (12)
-
hey there!!!! its been forever..... I haven't had time to keep up on your quest. but Im looking forward to seeing the finished product. ;) so what all can this be put into and what are all the mods? I have a single 225 in my duster.... do you think this well give it some perk!
-
VERY impressive TQ numbers! Continue to show the world what Chrysler performance engineering is all about. IIRC, the same engineers that worked on the Slant Six, were responsible for a little ol' project known as... the Hemi. Not sure if it was the "early" or "late" block / head configuration..but it doesn't surprise me either way! BTW, have you run into any difficulty with the coating stripping off of the rotors because of this being a carbed "draw-thru" configuration? Thanks for posting.
-
haha, good christ, the brackets required to manage that.every slant should be blessed with a 6-71
-
scott
do you know if it will work on a plymouth duster?
0:52
Slant 6 hyper pakby adamssv1007,372 views- 0:51
supercharged slant six lifting a tire againby maxwedgman1,295 views
- 2:49
Slant 6by bogantown6,054 views
- 1:15
11s Slant Six Cuda at MIRby rreeddwine15,989 views
- 0:53
jeds valiant turbo hemi first 8 second pass..mp4by aaronbed14,088 views
- 0:35
Turbo Slant Six 10.74 @ 127 mph 7-19-10by turbo66valiant5,529 views
- 0:49
11 second Slant Six Valiant Station Wagon - Mopars North of the Gate 2009by rabidscott23,000 views
- 1:31
Blown inline six with soundby Sixforgo42,761 views
- 0:33
1967 dart turbo slant six untunedby frankrtboard9,798 views
- 2:57
QCA Dyno Day 12/7/08. VC Sedan Drag Car 225 Slant 6by 75vkute3,293 views
- 3:07
Dragon C6 Z06 1000M supercharger 800 and 1000hp Dyno Test Part 2by DragonRaceEng12,472 views
- 2:05
slant six blowerby terrylittlejohn3,613 views
- 3:48
SLANT 6 TURBO MANIFOLD BUILD.wmvby forsaleau8,592 views
- 1:07
Slant Six N/A vs Stroked 440by etexis4,153 views
- 2:26
72 Duster Twister Slant 6 on Chassis Dynoby grasoper5,016 views
- 0:35
vc valiant burnoutby stanleyo691,423 views
- 1:41
Turbo Valiant ET 12.85 - Slant 6by turbo66valiant3,108 views
- 0:41
Slant 6 Valiant runs 11.17 @ 119by turbo66valiant5,836 views
- 0:44
Valiant Slant 6 Dyno 370 rwhpby turbo66valiant30,907 views
wow thank you for doing something like this!!! I see a lot of people doing this on there own. And I saw a kit out there but you loose the power steering. Did you guys think of a sleeper look where you could keep your stock hood?
scottday8 1 year ago
@scottday8
Thanks Scott.
Yes we have a very short adapter under way that will accept a webber carb and axial supercharger, clearance is tight at the back thou and may oly fit limited models.
MrTrippleT 1 year ago
So what was your estimated total HP? I'm trying to find out as much information as possible about that intake and how the application and testing has been going, but I'm coming up extremely short.
bthieson 1 year ago
@bthieson
On this run the car made 189 HP at the flywheel, but it had old fuel, standard distributor curv and a borrowed carby.
Since then we have been developing production parts for the kit and have fitted a set of extractors with larger primary pipes, the dissy has been locked and it will get fresh fuel before running up again. This engine was a standard rebuild and the blower was not part of the original plan so we will not be leaning on it too much, will keep it under 10 psi.
MrTrippleT 1 year ago
Wow thats nice!! More video please?? Thanks for posting this!
YOUDONTNOME001 1 year ago
@YOUDONTNOME001
Thanks for that .
Will post up more vids as soon as we finish playing around with exhaust, carb and ign.
Hopefully in the next few days.
MrTrippleT 1 year ago