Trailer Wiring Harness Installation - 2004 Honda Pilot - etrailer.com

http://www.etrailer.com/tv-wiring-install-2004-honda-pilot.aspx

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Today we are going to install part number 33105 from Hoppy, and we are going to install this on a 2004 Honda Pilot. A wiring connector is hidden behind this plastic piece right here in the threshold, so what we have got to do is get behind this, take it up, and then get between here and the bucket that is behind here, and that is where the connector lies. Pulling back the bucket here, you can see where our wiring connector is hidden. We will loosen that up and install our harness under that port.

We have pulled the wiring harness up to give you a better idea of what it looks like. And basically what is going to happen is it is just going to snap together. We can hide this whole assembly, making sure nothing really gets pinched. You can tuck your wiring and go all the way back to this corner here in that little opening right there. And what is going to happen is that this wire harness will stay in this bucket area here. And when you need to use it, you just pull it out and you shut the trunk lid on it. The door seal here is plenty thick where it is not going to hurt anything. And also, what is nice about having it on the inside is that your 4-pole will not be constantly sitting outside, getting corroded up. So, let us go ahead and put that back in here and again, it will just snap into place. All right, and with that, that finishes our install of part number 33105 from Hoppy

Category:

Autos & Vehicles

Tags:

• etrailer.com
• 33105
• wire
• wiring
• electrical
• harness
• install
• installation
• t1
• t-1
• one
• 2004
• honda
• pilot
• pilot honda 2004
• connecter
• connector
• port