Aerohead - Repeatable Remote Camera Head - Pacific Motion Control

The Aerohead is a fully repeatable remote camera head that can be configured as a 2 or 3 axis head (pan/tilt, or pan/tilt/roll). It is capable of carrying full sized film camera packages, and is equally at home with a Panavision or Arri 35mm Film camera, as with a Red One or Sony HD camera. It can also interface with Preston lens controls and lens motors, and can record and play back lens movements along with camera movements. The Aerohead features very quiet servo motors, so it is great for sound sync environments.

A typical Aerohead package includes a 2 or 3 axis camera head, Aerohead control panel, Pan/Tilt/Roll handwheels or pan bar, Preston Interface, Preston FI+Z 2 wireless lens controller, Preston lens motors, a bloop light (for syncing multiple takes), power supply, and all necessary cables. This complete package can be shipped in just a few flight approved cases.

Pacific Motion Control has a large rental inventory of repeat heads, remote heads, and motion control camera heads, including 2 and 3 axis Aeroheads, the Talon 2 axis repeat/remote camera head, and our 2 and 3 axis stepper and servo motion control camera heads.

The Aerohead and Talon are equally well suited for cranes, jibs, dollies, and sticks. Our motion control camera heads can be used alone, or with our motion control cranes and dollies, for up to 9 axes of motion (Track/Dolly, Boom, Swing, Pan, Tilt, Roll, Focus, Iris, Zoom). Additionally, our Kuper motion control software can control additional channels, allowing for control of turn tables, model movers, variacs, edit bits, effects, and just about anything else you can think of.

The Aerohead and Talon are easy to learn, and can be rented with or without a tech. All of our motion control equipment including camera heads is provided with a motion control technician and operator.

For more information please visit http://www.pacificmotion.net, or call us at 661-768-1753.

--AEROHEAD CONTROLS--

* Straightforward, understandable controls
* Integrated Preston lens and camera control system
* Wheel settings pre-programmed to Arriflex and Panavision gear ratios
* A wide range of user gear ratios changeable 'on the fly'
* Flywheel-assisted operating wheels to match the feel of standard camera heads
* Extremely fast installation and setup
* Straightforward, understandable controlsIntegrated Preston lens and camera * A wide range of user gear ratios changeable 'on the fly'

--AEROHEAD SPECS--

* Height -- 27″
* Width -- 23 3/4″ (3-axis mode), 15 1/2″ (2-axis mode)
* Depth -- 15″
* Weight -- 70 lbs (3-axis config), 57 lbs (2-axis config)
* Roll Ring ID -- 11 3/4″
* Pan Speed -- 2.8 seconds 360 degrees
* Tilt Speed -- 2.8 seconds 360 degrees
* Roll Speed -- 4.0 seconds 360 degrees

--PROGRAMMING LIMITS--

* Maximum Automarks -- 99
* Maximum Recording Time -- 23 minutes (stored in console). Only limited by hard disk if stored in computer
* Maximum Recorder Takes -- 40 (stored in console) Only limited by hard disk if recorded in computer
* Motion Recorder In Console -- Pan, Tilt, Roll, Zoom, Iris and focus

Category:

Film & Animation

Tags:

• Motion Control Camera
• Motion Control Camera System
• Motion Control Camera Head
• Repeat Head
• Remote Head
• Aerohead
• Talon
• CinemaPro
• Motion Control
• Kuper
• Preston
• Camera
• Film
• Movie
• Motion Picture
• Television
• Music Video
• Production
• Crane
• Dolly
• Turn Table
• Model Mover
• Variac
• Edit Bits
• CGI
• Special Effects
• 35mm
• Digital
• HD
• High Definition
• RED ONE
• Sony
• Arri
• Panavision

[Waterock100]

cool , you could do two time lapses at ones with one camera with two programmed directions chaning every 15 sec or so right ?

[jammapcb]

@HansomArdvark lol yeah looks like it..... i guess bog roll, sticky back plastic and some imagination will have to do

[HansomArdvark]

@jammapcb

Pretty sure this is one of those devices where if you have to ask, then you can't afford it.

[jammapcb]

how much is this product? Thanks