How To Open Your Nat Open With Bigpond Modems!!!!!! (Ps3)

Loading...

Sign in or sign up now!
Alert icon
Upgrade to the latest Flash Player for improved playback performance. Upgrade now or more info.
891 views
Loading...
Alert icon
Sign in or sign up now!
Alert icon

Uploaded by on Dec 30, 2011

Method 1 :
1- Sign Everyone Out
2- Type in browser: 10.0.0.138
3- Go to Gaming and Application sharing
4- Configure(top right)
5- Turn off UPnP
6- Test Connection From Xbox/Ps3
7- Configure
8- Turn On UPnP
9- Test Connection Again...

Method2 :
Step 1- On your PC go to start click on run copy and paste this command. telnet 192.168.1.254 (press enter) (You may need to enable telnet sessions, Google/search the start bar)
This will open a telnet session with your modem, you will then be asked for a Username and Password.
Username: admin (press enter)
Password: your modems password (usually blank by default) (press enter)
Step 2- copy and paste these 4 command lines one at a time pressing enter after each one is done.
:connection bind application=CONE(UDP) port=3074-3075
:connection bind application=CONE(UDP) port=3478-3479
:connection bind application=CONE(UDP) port=3658
:saveall
then close the telnet session
Step 3- Reboot your modem (just power off and back on) not always needed but is helpful to do after changes made.

If Method 2 dosent work with the telnet thing its means your ip address is wrong so go to google and type 'what is my ip' and it will tell you what it is.

  • likes, 0 dislikes

Link to this comment:

Share to:

Uploader Comments (XGamingStudioZ)

  • mine says redirect page, after i untick the box and press apply it says redirect. can someone plz help me. i dont have this run program thing as well

  • @demiod101 Add me on skype and ill walk you through it, shorty.izzedeen

  • and part 2 wudnt work at all

  • @TheKannita Trust me if you do part the right way it will work add me on skype and ill walk you through it is shorty.izzedeen

  • I did all that to the exact, I turned it off. Tested connection and had a Type 3. Then I turned it back on and had a Type 2, Type 2 being good. I went to MW3 and it said it was still Strict. Any help? I might ring bigpond and tell them to stop fucking me around.

  • @TechiProductions If method 1 doesnt work method 2 should work 100%

see all

All Comments (19)

Sign In or Sign Up now to post a comment!
  • Thank You

  • mine still stayed at using first method wtf

  • @TechiProductions if you had a open NAT in mw2 go on mw2 and go back to mw3 and you should have a open NAT

  • @supafob8 Yes i did that to for a while but then method 2 worked for me. To get the ip that works got to google and type 'What is my ip' and it will say your ip then from there copy that ip in to run but put telnet in front of it eg . telnet 69.0.96

Loading...

Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more