XTM XT2 BUGGY BRUSHLESS CONVERSION VERY FAST
Loading...
Uploaded by xgouldiex on Apr 4, 2010
A little vid of my XTM XT2 buggy brushless conversion, this is my first brushless conversion and i think it went very well. in the vid i blast it around to show how it gos and i do a few jumps (some good and some not so good lol) heres some of the specs brushless feigao 9L motor, 125 amp himodel esc, 4s 14.8v 3000Mah 35c lipo (will be upgrading soon, so even faster) , twin fan heatsink and cooling fan for esc, upgraded servos (tower pro MG995) as i am running with the brakes that come on the buggy as you have more control than the motor brake, 14 tooth pinion gear and 48t spur gear. And very good temps, MOTOR 95F-100F ESC 85F-90F LIPO 75F-80F So i mite even get a bigger pinion gear (so more top end) as i have plenty to play with.
Uploader Comments (xgouldiex)
All Comments (23)
-
when you go from nitro to brushless, do you need a smaller or a bigger motor pinion? (number of teeth)
-
what motor mount did you use, and where did you get it? I hope to convert my XT2
-
HAY CHECK MY NEW VID IF MY XTM XT2E HAD WINGS IT WOULD FLY!!!!!
4:34
Nitro VS Brushless Truggy Showdown!!by scohen197574,033 views- 3:13
Traxxas Blast + Mamba Maxby microraver48,815 views
- 1:32
HPI NITRO RS4 1/10 Scale 1by 30GB52,577 views
- 3:12
XT2e castle creations upgrades!!!by Clayspeed1,051 views
- 3:01
XTM XT2e Racing Slash - Bash Jump & Speed Runsby pianori591 views
- 3:47
Converting a Nitro R/c Car To Electric Pt. 1 of 3by rcdevil22,324 views
- 3:50
ready2run 1:5 Brushless Offroader Buggyby ready2flych38,060 views
- 3:37
XTM XT2 1/8 BUGGY RUNNING VIDEOby beastly2391,455 views
- 4:36
XTM Racing Rail Full Length Versionby teamxtm87,674 views
- 1:10
Make your Traxxas Rustler or E-Revo VXL Run Coolerby VetteWay2Fast10,510 views
- 1:43
xtm xt2 Novak HV 6.5 Brushless 4 saleby studioti5,250 views
- 3:44
F430 GT Challenge- XTM XT2 Buggies Converted into on-road GT race carsby studioti3,559 views
- 0:49
XTM Xt2e accelerates!by Clayspeed1,644 views
- 1:35
LED headlight tail lights - On my XTM XT2 converted 1/8 scale on road GT nitroby studioti2,506 views
- 0:51
rc car all started upby ISHY4543,421 views
- 2:07
Caster Racing Brushless 1/8-Scale Buggy RTRby AirAgeMedia1234,907 views
- 1:23
My XTM XT2by RacerRix9,778 views
- 10:58
XTM XT2 Buggyby Knight2000Kitt3,660 views
- 7:10
Fast Nitro Gas RC Car MAMMOTH ST XTMby yesssigotmail4,299 views
- 3:32
RC Cars and a speed gun...by Sheks8,043 views
Hi there. What motor mount did u use and was it a straight fit? Thanks very much.
TAMIYA911 2 months ago
@TAMIYA911 hi i dont use this motor mount anymore (a boat mount) it was to weak and keeped bending, iv made a new one out of 10mm aluminium now but if you wont a direct swap get the motor mount for the XT2E just type xt2e motor mount into google
xgouldiex 2 months ago
@xgouldiex Thanks very much. R u sure the xt2e motor mount bolts straight on without any drilling to the chassis? Thanks
TAMIYA911 2 months ago
@TAMIYA911 yeah im sure my mate converted his xt2 and he purchased the xt2e mount and it bolts directly in. the xt2e is identical to the xt2 accept the new electronic mounts (motor mount. esc mount . battery trays)
xgouldiex 2 months ago
It all depends on the motor and also what size batteries u use. just keep an eye on the temepratures, if they get to high the you will need a smaller pinion gear. on this buggy it has a 14tooth pinion the same as the nitro engine but it suits the motor. hope this helps
xgouldiex 11 months ago
how much did the motor cost
boomhower0 1 year ago
@boomhower0 alrite mate, this motor only cost me 20 pond as i got it of a mate. but new there about 45. but if your thinking of getting one of these i would have a look at the XL size of this motor as its only 5 pound more (50) but packs a punch . going to be getting one myself
xgouldiex 1 year ago