SportRack 2 Bike Wheel Mount Rack Review - etrailer.com

http://www.etrailer.com/tv-demo_sportrack_2_bike_wheel_mount_bike_rack_A30901...

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Today we are going to show you part number A30901 from SportRack. This is their 2 bicycle rack designed for 1 1/4 inch receivers and 2 inch receiver hitches. Now for the 1 1/4 inch receiver it does have to be a class 2 hitch. First up we have to install it on our 2 inch receiver hitch. Instead of a hitch pin it comes with a bolt. You pull this pin out and it just unscrews like a normal bolt. Then you just slide it in aligning the holes before you reinstall the bolt. You go ahead and tighten it down with a 3/4 inch wrench. This bolt acts like a anti rattle device that makes the entire thing one solid assembly now. Okay once we have our bolt installed we will install our safety pin just to make sure if it comes loose it will not come all the way out.

A second bike is what we are going to put on next. Notice that the second bike is a smaller frame then the first bike so that you can see the adjustability of the bike rack. The ability to adjust the 2 separate hooks to fit the different frames is a pretty handy thing. You put the wheels in the wheel wells first then make any adjustments that you need to before pulling your hook over and locking it into place. There you have it 2 bikes properly stored and ready for your road trip. Alright and there you have it for A30901 from SportRack. The 2 bicycle rack that is a wheel carrier for 1 1/4 or 2 inch receiver hitches.
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Category:

Autos & Vehicles

Tags:

• sportrack
• sport
• rack
• bike
• carrier
• wheel
• mount
• trailer
• hitch
• etrailer
• etrailer.com

[Friendly0Dan]

I had this bike rack, it worked, but it swayed violently back and fourth while driving and bounced tremendously over small bumps..