Bedini 10 - results of dioding
Loading...
507
views
Loading...
Uploader Comments (Pwordchernoir)
see all
All Comments (5)
-
I suggest that you do a simple test: This circuit would be completely separate from the motor. Discharge the cap and then connect the cap ground to the battery ground. Connect the diode between the positive terminal of the cap and the +12 volts of the battery so the diode conducts from the cap to the battery. The diode is reverse-biased and should not conduct electricity.
In practice, diodes are imperfect and have leakage currents. Monitor the voltage on the cap and see if it goes up.
-
Try to separate you're rectifiers and hook it
to a separate cap..
Then,hook it to a main line,one for the positive,one for the negative.
With a diode on each positive.
Loading...
Next step!!
You could,if you whant,connect a cap to each
of you're rectifier..
This way you could EXTRACT MORE from each rectifier.
Let me know the results..
The THING here is just to OPTIMISED you're
actual system!!!!!
Maybe!!If you see good results,you could
harnest more generators on you're next setup..
peper0110 4 years ago
only have 2 2200uf caps. i could series two of them into another cap. might work but ill get a third cap. cheers for ur input brother!
Pwordchernoir 4 years ago