Sapac Eurofighter Typhoon Maiden Flight @ Bluffton Intl.
Loading...
935
views
Loading...
Uploader Comments (djsyntaxerror)
see all
All Comments (2)
-
did you by any chance need servo extension leads? seems like mines wont reach where the reciever should be placed. (in front of the gear servo) unless i have to scoot the reciever back which i think will interfear with the battery...i just did what you did placing the esc behind the balsa divider...seems like a good spot! any help will be good! thanks
Loading...
nice flying, do u know where centre of gravity is on the tyhpoon ?
phats24 3 years ago
I am flying this at about 165mm
I marked off 160mm to 170mm on the belly of the plane, and well with the stock battery and the landing gear OFF it seems to be the sweet spot.
I also cut a hole and just moved the esc down into the duct right behind the balsa duct divider. Works perfectly.
I measured the cg from the leading edge, not where the joint glues together. I measured from exactly the wing and fuselage meet.
It is a sweet flyer, and hope this helps
Good luck!
djsyntaxerror 3 years ago