1995 Toyota T100 1.5 inch front 2 inch back lift. 265/70/16 tires.

Here is a 1995 Toyota T100 with a 1.5" ball joint spacer and a 2" add a leaf from toyotec. I didn't crank up the torsion bars. The truck will need aligned asap after install or it will wear tires. I recommend getting new inners, outer tie rods and sleeves during the intstall it makes it a lot easier to install.

Category:

Autos & Vehicles

Tags:

• lifted
• T100
• ball joint spacer
• add a leaf
• toyota
• pickup
• ben
• mohn

[427ysc]

Yes correct 1.5 inches in the front i didnt want to stiffen the factory torsion bars cause i drive the truck on the street also.

[427ysc]

No im running stock shocks. They work good on the road but offroad you will need extended ones cause it will pick up the tires. And yes currently i am running 285/75/16 tires no problem at all rubbing with the front mudflaps removed.

[427ysc]

I havent had a single problem drove it round 6000 miles like this and took it offroading went all out no problem with them I check the bolts evry once in a while

[evildude12]

My toyota T100 have 8" chevy springs on it with dana 44 and dana 60. it drive very aggressive with 35" procomp tires.

[pimpedracer]

Ya wat website did u get the BJ spacers from? I want to add more lift to the front of my truck, thanks

[psysergio84]

buen dia where can i get those spacers i im in tijuana tanks!

[davids96t100]

dont mess with the torsions. mine is so stiff it cant even climb a curb. it sucks

[87MENGER]

I'm doing the same thing you have on you t100 and my truck is a t100 also. I'm installing the 1.5 BJ and 1" rear blocks. now what do you think i need to do to get everything right. As of this point all i know that, i have to cut some metal away from the A Arm (upper ball joint). my # 1 thing i want to ask is that i just bought new shock by Bilstein and if i just put the 1.5 BJ on and not going to crank up the torsion bar, will i be okay on that.

[ToyotaOutlaws]

i like it.. i have a 94 toyota pickup myself and it has a 3" body lift with 33 inch tires and i am thinking about going with the 2 inch spacers crank up the torsion should give me about 4 more inches of lift with the spacers

[deansies]

u said u didnt touch the torsion bars at all? u got lift by just putting in the spacer?

[tractor161]

Very nice t100 i have the same thing and have been looking at the toytec lift. Did you have to get the extended shocks and how big of tires do you think after the lift you could put on it? any advice would help i love my t100 and want to put a lift on but nothing crazy and want some bigger tires hopefully BFG all terrains. And how simple is putting the lift on?

[aaminjoshi91]

I never heard of ball joint spacers before. is it a safe lift? i mean the ball joints already have a lot of pressure on them. I know about the leaf's. I just did a torsion/shackle lift on my 2002 durango.