Modern Stanley Planes In Use
Loading...
Uploader Comments (1sdrummer2)
All Comments (7)
-
Great demo. I enjoyed this video.
-
ive been a quaified carpenter n joiner 4 2 yr now n all my planes are stanlet n recoed planes old and new and all of them i can produce a shaving of half a thou of a shaving
becuse i brign them to a high standard
n also the blade n chip breaker i have replaced in my jack plane n ma joiner
-
it seems as if you have your blade to exposed on your joiter or you blade is not sharp also youse some beeswax or cannign wax on sole to reduce friction
-
The board you are planing against would be much better if it were secured better so you don't have to fight as much. With the number 8 I think it was or 7 in the beginning might be adjusted to cut a little to thick as you shouldn't have to force it so much, again wax will help out. Anyways those are just a few things that will hopefully help you out. Thanks for the video.
2:38
Hand-planing a table top with Timothy Clark Cabinetmaker / Chairwrightby tac105823,440 views- 2:51
How To Use A Block Planeby VideojugDIYGardening1,221 views
- 0:38
Using your Stanley 45 planeby sohnrog3,670 views
- 7:03
Petite Roubo 2 of 3by PenultimateWoodshop4,651 views
- 1:57
Jointing 10 foot long southern yellow pine.by RaiderSix12,444 views
- 0:42
Using a plane to flatten and smooth the surface of the spruce woodby dweinberger124,293 views
- 9:27
Mitered Half-Lapsby GarageWoodworks4,852 views
- 0:55
Lie Nielsen No 51by popularwoodworking12,923 views
- 8:58
Lie-Nielsen large router planeby julioyaldonza30,386 views
- 7:48
Workshop Heaven - Clifton 4-1/2 vs the 'wood from hell'by Workshopheaven6,903 views
- 20:33
Understanding Handplanesby LieNielsenToolworks3,601 views
- 4:02
How To Handle A Moulding Plane.wmvby lethentymill5,241 views
- 10:05
Petite Roubo 3 of 3by PenultimateWoodshop2,181 views
- 4:21
The Bench Slide Mountby BenchSlideMount10,218 views
- 10:34
Baroque violin Ep1.mpgby KRWoodworks4,630 views
- 8:17
Using a Luthier's Shooting Boardby MDLuthier15,637 views
- 3:05
Groz hand plane kitby dsb18298,186 views
- 3:25
Chris Schwarz drawboring demonstrationby popflop2,274 views
- 2:21
Craft in America - North Bennet Street School - Sloydby craftinamerica20073,527 views
I'm am fairly new to handtools (1.5years) and I have amassed a decent collection of older stanleys. While I don;t use the modern ones I don;t think any plane should geta bad rap if you can easily tune it and produce good results. It's always nice to see instructional videos of these planes. I just wanted to add a couple suggestions that are things I've learned. Waxing the sole will make planing much smoother and requires less effort and will not interfere with finish.
bobs64ford352 1 year ago 2
@bobs64ford352
Thanks for the kind words. I always have had a bit of trouble with my #7. It's a bit tricky to get set up consistantly. But it was ony $120. Where as a LN #7 at the time was $400. Overall I think it was worth the trade. But everyone has their own opinions this was just me throwing my $0.02 in the ring.
1sdrummer2 1 year ago
Hey guys, don't be afraid to leave negative feed back. I know this video sucks. The lighting is bad and you can't see the finish being left behind by the planes. I hopeing my future woodworking vids turn out better.
1sdrummer2 1 year ago