First X525 Engine Tests Create Bizarre Results?

I wanted to show you the bizarre results of my X525 build. I don't have a manual or a wiring diagram. I'm doing everything I can to research this project online, but here we are, and this is what's happening now.

Category:

Entertainment

Tags:

• X525
• Quad-Copter
• Engine
• Tuning
• KK
• Multicopter
• Home-made
• Maiden
• Voyage
• helicopter
• aerial
• photography
• FPV
• Flight
• DIY
• China
• failure
• explosion
• blood
• disaster Flying Air Helicopter

[08maxout]

MMP,

I bought my kk board in a kit form from this site;kkmulticopter. They have a lot of frequently asked questions and answers. If you haven't visited this site check it out. There maybe some information that will help you.

[MobileMediaProducts]

@08maxout Hi, I've been there a lot! I've also be in contact with Christian Moll. He rewrote the V0.50 firmware so it would work for me. Thanks for the recommendation!

[SebMarra]

Hey, hows it coming along? My shipment for my atmel programmers been lost, great now I have to wait even longer! I see you need something from good old bunnings? I go there like everyday, What was the other dude referring too?

Happy flying!!

[MobileMediaProducts]

@SebMarra Hey, Man, yep, I'm interested in a plastic cross he is using for a quad-build? I think it's used in shelving? He shows it in the build video he's doing right now. Maybe you could check his video out? I asked him to send me a link, but that didn't happen. It's an interesting part, because connecting each beam to the central location is a design problem. The plastic cross he found there may be an excellent solution. You can email me at corlissmedia@gmail.com

[ariekraakjr]

You need to calibrate the esc trottle range. See your programming manual of your esc. Put the servo lead in the receivers trottle channel one by one to do this....if you have anny questions...ariekraakjr@hotmai­l.com

[MobileMediaProducts]

@ariekraakjr I finally took one motor/esc off the rig, and used your calibration info (plus some other info), to get it squared away. Now I'm going to calibrate all of the motors individually! Yea!

[08maxout]

@MobileMediaProducts

MMP, I've got a Futaba 7cap tx. I'm not familiar with the Flysky tx. Hope you get it going.

[MobileMediaProducts]

@SebMarra That's really interesting about the KK board needing the 2 servo option to work in HELI mode! I did manage to calibrate one mis-behaving motor finally! Yea!

[MobileMediaProducts]

@08maxout Morning, what is your TX? Mine is the Flysky FS-TH9X. I know about acro/plane mode, but I can't edit the current/working profile to that mode. When I try to do that, the profile switches from MODE 2 (left hand throttle), to MODE 1 (right hand throttle), and all of the other settings get screwed up. Let me know if you have a solution to that!

[MobileMediaProducts]

@Johnbrum26 Yep, they finally sent me the right board, but the programmer was pure crap. I had already purchased another KK board and a programmer from S.F. Both of which worked perfectly!

[Johnbrum26]

got the same kit as you, but m boards in + mode, the programmer that came with it will not work to flash it, so I ordered an atmel programmer.