A year ago no one had done it ......I only know of one that has pushed over 355whp and this is what it took to do it ZZP 2.3L stroker bottom end w/ 11:1 compression ZZP electric water pump with Balance shaft delete kit ZZP single pass IC ZZP 15 row single pass HE ZZP 2.6" modular pulley system ZZP LS4 TB ZZP intake ZZP mid-length header/downpipe 1.75" stainless 79# injectors ZZP fuel pump rewire ZZP High flow fuel pump E85 fuel
this started happening to me lately and has been driving me nuts. i run a 235/40/r18 falken 452 on them and i will shift at 5-6k rpm and slip second even though there is no tire spin. i will try your advice on shifting lower and see if the powerband is low enough for the clutch to grab. thanks for the advice
i only read up to the 350whp part, thinking you were saying people were making that on the eaton, thats where i was coming from.
no argument with the 350 on the stock clutch from a turbo LSJ.
turbos seem less brutal on components than the s/c to begin with.
numerous people on RLF have kept the stock clutch on with the eaton and made 260-280whp,clutch didn't like it, but it took it haha. hence why everyone upgrades to spec 3 or exedy eventually.
There were guys putting over 350 to the wheels 9 months ago..... where the fuck did i say it was on a stock M62. If you don't think that 350 hp was achieved 9 months ago your fucking retarded.
I know the limits of the heaton .... This whole disscussion was about the stock clutch...so why the fuck did you comment in the first place??? O yeah to tell me 350WHP wasn't possible when i made the above comment...hahah they've been turbo swapping alot longer than that. Like i said go do some reading
Comp cams custom ZZP camshafts
which one is it? lol
AFinRoo 2 years ago
ZZP stage 1 ported head with 78 lb valve springs
Comp cams custom ZZP camshafts
ZZP AC delete
ZZP stage 4 clutch
ZZP lightweight flywheel
rukkee22 2 years ago
rukkee22 2 years ago
my dads truck started slipping so bad that he couldnt get his truck to go 10 mph he lost all tranny fluid its an automatic
joeldude76 2 years ago
this started happening to me lately and has been driving me nuts. i run a 235/40/r18 falken 452 on them and i will shift at 5-6k rpm and slip second even though there is no tire spin. i will try your advice on shifting lower and see if the powerband is low enough for the clutch to grab. thanks for the advice
zipo1200 2 years ago
still cobalt........cool...............
hanstaILL 3 years ago
It's all good.
I agree the HEATON isn't capable of anywhere near 350 whp , they just don't have it in them.
Anyways sorry for the misunderstanding.
rukkee22 3 years ago
haha nah man that was my bad.
i only read up to the 350whp part, thinking you were saying people were making that on the eaton, thats where i was coming from.
no argument with the 350 on the stock clutch from a turbo LSJ.
turbos seem less brutal on components than the s/c to begin with.
numerous people on RLF have kept the stock clutch on with the eaton and made 260-280whp,clutch didn't like it, but it took it haha. hence why everyone upgrades to spec 3 or exedy eventually.
daythecountrydied21 3 years ago
There were guys putting over 350 to the wheels 9 months ago..... where the fuck did i say it was on a stock M62. If you don't think that 350 hp was achieved 9 months ago your fucking retarded.
I know the limits of the heaton .... This whole disscussion was about the stock clutch...so why the fuck did you comment in the first place??? O yeah to tell me 350WHP wasn't possible when i made the above comment...hahah they've been turbo swapping alot longer than that. Like i said go do some reading
rukkee22 3 years ago
wow man. are you serious?
when did i ever say anything remotley close to a clutch?
are you fucking retarted?
the m62, you know, the supercharger that comes on the ss/sc and ion redlines, thats not a clutch you moron.
im talking about 300+hp will overspin the fucking m62, so you'd have to upgrade to the harrop tvs, or a turbo, if you wanna put out higher numbers.
never said anything about the clutches you royal loss.
daythecountrydied21 3 years ago