KZX1250 Intelligent Automotive PWM for HHO

Order the KZX1250 at
http://www.adicorp.net/php/kzx1250_order.php

The KZX1250 is a brand new PWM, not to be confused with any other PWM; The KZX1250 has an on board computer with advanced features that make it virtually bulletproof and safe to use, no other PWM can match it.

Don't trust any PWM under your hood. With the KZX1250 you know you are safe and that your PWM is designed to handle tough situations that most other PWM's were never designed to.

Start out with a computer that digitally generates the pulses. Send the output through Schmidt triggers to get a sharp squarewave which is then fed to a high speed MOSFET driver and finally to 8 PowerPak MOSFET's through their own individual driving resistors. The efficient design means it runs super cool. How cool is that? The KZX1250 does not have a heatsink because it just doesn't get very hot; just a small 40mm fan. With 50 amps going through it at max frequency, the KZX1250 enclosure doesn't even get warm and the protruding circuit board gets luke warm, you can squeeze it between your two fingers without getting burned!

As you'll see in the video, the KZX1250 has short circuit protection. Automotive fuses can take up to 100 miliseconds after its rated current is reached before opening. That's a tenth of a second; which might seem fast to you, but to semiconductors, it is like a year! Fuses are activated by heat and the same heat that the fuse sees is the heat that the MOSFET's see as well. The KZX1250 opens the circuit in less than 1 millisecond so it's virtually impossible to damage it due to a short circuit! Why waste your money on fuses which cost $2 a pop? ...and why subject your MOSFET's to irreversable damage?

The KZX1250's thermal protection means you have protection against certain situations that could turn your car into an inferno. The fan on a PWM is there for a reason, to keep the MOSFET's from burning up; yet the fan being a mechanical device is the most vulnerable component on the board. What happens when the fan gets clogged with dust and dirt or if it just stops working altogether? Who will be there to turn off the MOSFETs? The KZX1250 has a temperature sensor that makes sure the temperature doesn't rise above 75c. If it does, it is quickly turned off and an error code is displayed.

Is you're going to HHO, you might as well do it right.

Be smart and be safe; get the KZX1250!

UPDATE: IMPORTANT INFORMATION!!!!

Find out why DC/DC Converters are misrepresented and will not perform as many claim they will.
http://adicorp.net/php/articles.php?id=3

Find out why a throttle or RPM controlled PWM will not perform like many claim and how it will negatively affect your system instead.
http://adicorp.net/php/articles.php?id=2

For more information on the KZX1250 including how to purchase it, please go to www.adicorp.net

Category:

Science & Technology

Tags:

• HHO
• Hydroxy
• PWM
• Pulse
• Width
• Modulator
• Hydrogen
• Oxygen
• Booster
• Automobile
• Dry
• Cell
• Current
• Amperage
• Overheat
• Limiting
• Automotive
• Thermal
• Runaway
• Gas
• Electrolysis
• Generator
• Fuel
• Engine
• Short
• Circuit
• Protection
• Alternator
• Voltage
• Regulator
• Constant
• CCPWM

[FreeMindResearch]

For those who are wondering what happened here, I have deleted the entire discussion at the request of ttsqas. I never delete comments, but since he felt strongly against what was said and since everything said was completely off topic, I removed it for the sake of peace. Please do not create wars here!

[casehydro]

@FreeMindResearch

They call me casehydro. Please let your interested followers how to contact you. Seems to be a very well engineered machine, what web site do I go to to find out how to contact your company? Thanks. Bill; casehydro@yahoo.com

[FreeMindResearch]

@casehydro I just updated the sidebar to reflect the web address. Thank you!

[1911peterg]

My HHO Generator gets Earth ( Minus ) through the Mounting Bolts from the Chassis. Will the KZX 1250 still work ? Or is there another Way then to connect the Positive from the Battery to Positive on the HHO Generator and Negative from the PWM to the Negative of the HHO Generator ?

[hydrogastech]

How do I get one? There's no info.

[tangnatalaga]

@kevinisek2009 Any car would run on water provided you put enough energy to split water molecules. I still strongly believe it requires too much energy to do so to be of much benefit. I could be wrong but if can demonstrate the whole idea I would believe it. I have done so many experiment on electrolysis since the 1980s and had not been very successful with my step dad who was a master in engineering.

[kevinisek2009]

Awsome vid. I like making cars run on water too. I built a site devoted to spending less on gas. divinerighttechnologies.webs.c­om

[pretorien86]

hello or I just find it because I am interested in what site it sells I will buy it thank you tell me you should put the link text with your thank you good day

[jdcproducts]

I want one but can't find them anywhere! This is one of the most advanced PWM's on the market. Where do I get this?

[HHO64]

FreemindResearch, I'm a serious buyer, willing to make a purchase immediately, can't wait for Ebay. Solid product, great video!

[richardlyew]

me like, where can i get one?