Building a Wind Turbine (43 of 46) Test assemble and drill and match lid.
Loading...
Loading...
16,491
Loading...
Link to this comment:
Share to:
Uploader Comments (imikewillrockyou)
see all
All Comments (6)
-
you should put a fence around it, zombies like to attack moving things
-
would waven piprng be good fot the blades was thinking of doing it that way, just cu the piping in half
-
Dobra robota tak szczegułowo opisales film ze kto ma swmykałkę do majdrowania napewno sobie poradzi pozrawiam mieczek
-
Thanks for such detailed instructions. It's like being right there with you. Appreciate your work!
Loading...
- 2:04
Building a Wind Turbine (46 of 46) Finishing Upby imikewillrockyou12,177 views
- 0:25
14- VAWT 16 blades prototype Darrieus Savonius lift-drag mix turbine with self-made alternatorby jedufa14,486 views
- 1:34
13 VAWT First Complete Prototype! It turns smoothly!by jedufa17,397 views
- 3:34
Building a Wind Turbine VAWT (Step 1 of 46) - Layout Rotor Location Linesby imikewillrockyou18,139 views
- 1:26
Building a Wind Turbine (45 of 46) Set Carriage screws into Lidby imikewillrockyou26,582 views
- 5:56
Building a Wind Turbine (37 of 46) Screw and Silicone 15 Turbine Blades onto Rotorsby imikewillrockyou6,939 views
- 0:36
Low Wind 50KW to 250KW Wind Turbine Efficiency Testby realracecom156,780 views
- 4:47
Building a Wind Turbine (35 of 46) Glue and Clamp Top Ring onto Top of Stators.by imikewillrockyou5,442 views
- 2:53
Building a Wind Turbine VAWT (Step 15 of 46) Drill 7/8th holes eight placesby imikewillrockyou3,411 views
- 3:27
Building a Wind Turbine (27 of 46) Square and Glue Struts to Base Ringby imikewillrockyou3,439 views
- 1:27
Low Wind Turbine 2,500 watt UL/CEC Approvedby realracecom9,585 views
- 4:51
Homemade Vertical Axis Wind Turbineby batfink009397,525 views
- 2:46
pvc vertical wind turbineby melecio1415,024 views
- 1:41
44 Open holes on mounting ring with letter "i" drillby imikewillrockyou5,708 views
- 1:44
Building a Wind Turbine VAWT (Step 14 of 46) cut poplar stators to 16 and one half inchesby imikewillrockyou4,032 views
- 2:58
wind turbine vertical axis rotorby SimonFortney343,594 views
- 0:51
How I made my first pvc wind turbineby supergokue1186,639 views
- 2:29
Building a Wind Turbine (34 of 46) Glue and Square Poplar Stators Eight Placesby imikewillrockyou6,627 views
- 0:50
Lynx Vawt with Axial Flux Alternatorby LynxSteam52,427 views
wouldnt adding some more staters block wind? thank you very much for the videos by the way..
recepturgut02 1 year ago
@recepturgut02 It might and any improvement would be very small. I suggest sticking with eight stators like I have in this video, it just works.
imikewillrockyou 1 year ago