#1006 - SilverStone FT01 Case Video Review

Watch in HD: http://exposureroom.com/vr_1006 CHECK PRICES: http://3dgameman.pgpartner.com

"The SilverStone FT01 Case is a very well crafted mid-tower case. There's two large 180mm fans and one 120mm fan which provide positive air pressure. The use of dust filter along with this positive air pressure eliminates dust and provides excellent cooling. There are five 5.25" drive bays and seven hard drives can be installed. Installation for these drives is a tool-less operation. It also comes with easy open side panels, top I/O ports and much more. Watch the video to find out more..." ~http://www.3dGameMan.com

Category:

Science & Technology

Tags:

• computer
• atx
• mid-tower
• case
• silverstone

[edge160]

IMO Silverstone >>>>> Lian Li.

[bob333336]

I love you to.

[MrRoosterfoot]

for the money yo spend this is crap. you could spent the same on a cooler master case getting better quality and if you spend slightly more you can get better quality.

[gtern298]

NOTICE!! I have purchased it and i can confirm the video reviewer removes the dust filter wrongly, so do not be put off by the way he removes the filter. His filter was placed wrongly on the underside of the case with pulling hook facing outwards towards the RIGHT >>> (towards the drive bays) causing the reviewer having to bend the filter risking damage. Mine was CORRECTLY fitted on the underside of the case with pulling hook FACING UPWARDS ^^^ thus no bending and easy removal.

[neo12neo]

Hi guys, frame instake (front and top) is alluminium too? Or Steel? Foam heats the machine?

Sorry for my poor english :(

[cssmrlava]

Unfortunately, the motherboard tray is not removable.

[Dean129012]

@GodDragon1 i have used the case, i built one for a client 2 weeks ago, maybe you got a dodgy batch because the fan filter does come out easily from the side like it was intended.

[GodDragon1]

@Dean129012 Obviously you do not have this case because if you would do a little more research, there is a piece of metal in the way of allowing this top be possible, its the piece right infront of the top 180mm fan that the side panel hooks on to. It would of been nicer to see it be able to be removed from the side, but just learning you can remove it without having to remove the actual fan like the bottom is still a good feature.

[Dean129012]

omg you pulled out the top dust filler wrong, it you just pull it from the side.

maybe you'res was just put in wrongly.

[UnrealGlider]

@alex14469 "but clearly this is not an enthusiast level case."

Direct quote from you..

[alex14469]

@UnrealGlider No, It is. What I am saying is that it makes no sense to apply the same standards to budget cases. A 40$ case will not have an aluminum frame or a removable motherboard tray.

[UnrealGlider]

@alex14469 This is not an enthusiast level case? Ok...^^