HHO Gas 15 Pipe Assembly Test 4-24-2008 through 4-28-2008

HHO Flashback Arrestor's For Sale on E-Bay
http://stores.ebay.com/HHO-Gas-Technology-LLC
4-24-2008 HHO Gas 15 Pipe Assembly Test.
We are using stainless steel plates and we are using a plastic cutting board between the stainless steel plates. The purpose of the stainless steel plates are to replace all the wires we used in the past. We will attach one wire to the positive plate and one wire to the negative plate. By doing this it will evenly disperse electricity evenly between all the pipes.
4-27-2008 after three days of testing citric acid in our final results is it does not work after running for a long period of time because all the buildup on the stainless steel. We have found out so far Kool-Aid we have tested over 40 hours of continuous running has worked the best so far. We are now testing now regular tap water and vinegar to see how it performs after a long period of running and if there is any build up. We will let you know the final results of all our natural testing mixtures which works the best at this point of time Kool-Aid is #1 so far we will give you the final results.

**30 Days Satisfaction Guaranteed**
This HHO Gas Technology Flashback Arrestor is one-of-a-kind in the world and there is no comparison to any Flashback Arrestor. Its superior performance surpasses all Flashback Arrestor's worldwide in performance with customer satisfaction. HHO Gas Technology offers a 30 day money back guarantee that you will be completely satisfied with its performance. What are you waiting for Flashback Arrestor damage failure from old technology to your machine or move up to the new technology.

Category:

Autos & Vehicles

Tags:

• hho
• gas
• water
• fuel
• cell
• hydrogen
• oxygen
• car
• that
• runs
• on

[srumrol]

I already see a problem with your design. Why would you use that thick bolts and cylinders? To create the electrolysis of separating the hydrogen and oxygen you need a lot of surface area so thick bolts and thick cylinders are just wasted current that goes into HEAT (since stainless is resistor). You would be better of by making thinner plates and more of them.

[pjckac1]

TO: @srumrol The reason for the thick bolt and thick stainless steel pipe is to hold the electrical current and magnetic field that is only created in a 360 energy field around a pipe device. This electrical energy field does not exist in a flat plate assembly. When a Renaissance is created in a pipe assembly it can be pulsated using a PWM and much more.

[edatecafe]

lol...I got this 3 years ago......call when you did something new

[pjckac1]

To:edatecafe

It appears to me that you have not watch my collection of videos on YouTube to see the new things I have done in the past year. In this new year I am working with an individual that we are going to be making hydrogen and oxygen separately out of a dry cell. In this new year we are also going to be making home and garage heating devices with HHO gas. This New Year's eve at Metro South church in Trenton Michigan I am using my HHO machine to shoot and explode confetti in the church.

[pjckac1]

If you think your dry cell is so good try using Kool-Aid in your dry cell and let me know if your able to produce HHO gas. I am sure he that you are using stainless steel plates. I have a welding machine with dry cell using 100 plates one plate with positive on one side and negative on the other side and all the plates between are all neutral. This welding machine produces 690 L per hour. Kool-Aid willnot work in this machine at all but Kool-Aid works with my homemade pipes and bolts concept

[Doversreturn]

still not very good bubbles though

[Flayprime]

I am curious... can this be done at any capacity without any catalyst?



[GBH2o4u]

I really liked the experiment, I also liked how you are searching for a enviromently safe electrolyte! thats way better then the potasium hydroxy I think! Have you tried a mixture of baking soda and white vinagar, I have tried this it works very well, I dont know though how well for a long test! I am going to experiment with copper pipe as the - and gold wire in the center as the +. I will share my findings...I think these 2 metals should work well because of there properties?Thanks

[firepinto]

Your losing efficiency running parallel cells. Anything above 2 to 3 volts per cell is creating excess heat. The heat boils your electrolyte and adds steam to your bubbles, throwing off the perceived amount of HHO produced.

[bestog2000]

wet cells suck. your not even producing a half a liter a minute. My dry cell puts out almost 3 liters per minute at 30 amps. get rid of wet cells. they are not worth it. plus dry cells are cheaper and safer

[MPKramer]

Hello,

Using citric acid - you must use 2 teaspoons per cup of water. This equates to 2/3 cup per gallon.

Try that on 6 volts and see what you get. :-)