How to make a xbox 360 power supply with a pc power supply (Part 3)

How to make a xbox 360 power supply with a pc power supply Part 1
Sorry about the way i sound... like a fucking douche bag yes i will say it before all of you


Need:
Soldiering iron
250 watt pc power supply
faulty xbox 360 power supply
wire striper
screw driver
soldering skills
pertinence and carefully listing

Procedure:
1. Take the faulty xbox 360 power cable and cut the end that connects to the xbox 360 (cut as close as you can to the brick)
2. open the pc power supply, take everything out mother bored other components out
3. Cut the colored cables out about half way
4. youre gonna want to unsolder out every colored wires EXPECT THE GREEN ONE
4A. How to: you take out the wires buy placing youre hot soldering iron on the wires solder point on the back of the board untill the solder melts and you simply pull out the wires
BE CAREFUL! (make sure you remember what color wires goes to what holes.. this is very important dont forget or make sure you lable it!
5. Make sure you have about 3 inchs of exposed wire of the xbox 360 power cable. solder each wire in the correct hole.
6. youre gonna wanna add a extra GROUND BLACK cable into the ground holes. (where the xbox 360 black wires went into.)
7. strip the black wire hanging out... now strip the green wire and connect both the black and green wire together and add a little solder and place a piece of electrical tape to make sure theres nothing exposed
8. Add hot glue or thermal glue to the wires to hold them down mmore... to loosen the stress on the solder joints....
9. put it back together and you're good to go...



Questions or comments message me!

Category:

Gaming

Tags:

• How
• to
• make
• xbox
• 360
• power
• supply
• with
• pc
• (Part
• 3)

[new14520]

does it matter how many Watts that is required.. cause my brick need 135W but my Power supply trows 300W.. would their be any problems??

[vinnnnnnnnyyyyyyyy]

@new14520 well make sure the amperage doesnt exceed above 16 at worse case, try and keep it around 14, and above 12

[Hotkiker]

ha ya so what if i have a metal face power brick. Will it work?

pls answer fast

and yeha can i use a power supply with the max voltages of 200

search metal face in google images and you will see what i mean

[vinnnnnnnnyyyyyyyy]

@Hotkiker you cant use a power brick over 120 volts but it mainly matter on the amperage, 

[getale]

What u recommand?? 19 amp for 12v and 25amp for 5v right??

[vinnnnnnnnyyyyyyyy]

@getale uhmm yeah i belieave xbox power cords amp vareas from like 16-22 so i belieave urs will be fine... becuase urs is 25 peak power so the xbox will be fine working with that

[QRIEOO]

awsome video but i have one question

my power cable only has 2 pins. it has no ground is it ok if i remove one of the power supply socket

[vinnnnnnnnyyyyyyyy]

@getale how meny amp is youres, i belieave urs is 25 amp... i belieave urs would be correct.

[getale]

Do we figure it out about amp???