Nissan(2000 yr)Altima 2.4 Twin cam (How to valve cover seal/gasket and tune-up)

replacing the valve cover gasket/seal on a 2.4 engine from Nissan Altima Sentra 240SX Stanza.Replace spark plugs, ignition wire, rotor with cap and more.Application for model yr (1986-2004)

Category:

Autos & Vehicles

Tags:

• KA24DE
• Nissan
• Altima
• 2.4
• liter
• engine
• Sentra
• Stanza
• 240SX
• gasoline
• filter
• auto
• car
• cars
• drift
• mazda

[mustangmikeca]

Have you ever had it idle rough? have you ever replaced the intake manifold gasket?

[SteveXnycperformance]

@mustangmikeca Rough idle, try replacing the gas/air filter and clean inside the throttle body and its butterfly(throttle body door and bore.Also inspect your ignition system(plugs,wire and rotor with distributor cap.

[jaguars08221]

steve have you replaced the pvc valve on your altima? , and if so were the heck is it located because I cannot find it?

[SteveXnycperformance]

@jaguars08221 The PVC is located below the intake manifold.You will notice a small black box fix to the engine block.The PVC is plug into the box. you will need to access it form under the car. don`t forget to place the car on jack-stand.

[joselm888]

what spark plug wire is you altima ngk, accel, or other.

[SteveXnycperformance]

@joselm888 Ngk Plugs with Standard wires.Plugs might need replace every six month or yearly due to blow-by in the combustion chamber.

[lumierephoto]

Thanks for making this video! I'll use this as reference to work on my Infiniti G20.

[mustangmikeca]

@SteveXnycperformance I don't think it's those things because it's only rough when idling, When driving, it's perfectly fine.

[wolfe2145]

very very informative. i appreciate this video it helped me out alot. it has made me go back to school to become a mechanic

[sakitlikod1]

Hi steve , do you have video on how to replaced timing chain or belt for 2001 altima & 2004 honda crv ? thxxx

[jayr122001]

how much does it cost if you will change a defective one valve?

[frdhenderson56]

awesome video! I went step by step and my car is no longer misfiring!! Only thing I couldnt do is take the two boats of the top two screws.

[drzvfr]

I don't know which year model you are doing here but 20 ft lbs is too high for a 2001 model! I stripped two bolts before I realized it was too high!!!! Not happy!