Part 72: Installing clutch cable. Motion Pro T2 clutch cable. YZ250F example.
Loading...
Loading...
13,739
Loading...
Uploader Comments (Johnnysshop)
see all
All Comments (55)
-
@Laverty84r Yep
-
Is it as easy as in ur vid to do on a 2005 yz 125 thanks
-
@corey5796 If it won't move when it's in gear it may not be the clutch. It could be the tranny. If the cltuch is working, you'll have to split the case to check out the tranny.
-
@crimson22s Actually it's a Rocky Moutain model. So far, so good.
Loading...
2:24
Part 73: Installing throttle cable. Motion Pro T2 Hot Start (hotstart) cable. YZ250F example.by Johnnysshop17,496 views- 8:23
Part 71: Installing throttle cable. Motion Pro T2 throttle cable. YZ250F example.by Johnnysshop11,137 views
- 2:11
Part 24: Assembling motocross bike Clutch plates and pressure plate. YZ250F.by Johnnysshop14,899 views
- 3:42
Part 74: Installing Devol radiator guards and mounting radiators. YZ250F example.by Johnnysshop6,838 views
- 6:02
Part 15: Dirt bike piston and cylinder assembly . YZ250F exampleby Johnnysshop36,302 views
- 7:05
How to Install Rekluse EXP (hydraulic actuated clutch models)by RekluseMotorSports8,382 views
- 9:27
Part 9: Assembling a motocross transmission. YZ250F exampleby Johnnysshop14,884 views
- 6:05
Part 21: Balancer shaft and kickstart idle gear. YZ250F exampleby Johnnysshop16,117 views
- 8:46
Rekluse Clutch Installby miles877517,491 views
- 4:26
How to bleed brakes with a brake bleeder. Bleeding rear master cylinder on Motorcross bike.by Johnnysshop38,756 views
- 6:53
Honda F4i Clutch Installby TwistGripTV12,994 views
- 2:04
Dirt Bike Grip Installationby PartsBandit11,245 views
- 6:04
How To Adjust A Cable Operated Clutch, Hondaby EricTheCarGuy28,544 views
- 5:16
Part 24: How to disassemble a motocross bike. Clutch, plates and clutch basket. YZ250F example.by Johnnysshop21,926 views
- 3:03
Part 2: Assembling a motocross bike/ How to install bearings without a press. YZ250F example.by Johnnysshop18,357 views
- 9:44
Dirt Bike Clutch Cable Cleaning and Lubricationby PartsBandit4,793 views
- 3:11
Part 6: Assembling a motocross engine bearing keepers. YZ250F example.by Johnnysshop9,774 views
- 3:44
Part 50: Motocross bike. Installing subframe and fenders. YZ250Fby Johnnysshop3,985 views
- 10:00
Tech Tips - Clutch Changeby precisionconcepts72,874 views
great vid !!! my buddy was riding my yz250 and when he stopped tha motor was still reving high so i had him take it back to my garage and i cleaned the bike and started it so i could check it out.was not doing that anymore than when i took offf i went to put it in second and the clutch cable snapped on me, so anyway i was wondering if you think that could have been the problem or its something way worse. any ideas?? thank you
neckcutter1 1 week ago
@neckcutter1 Hard to say. I'd replace the cable and see how she runs.
Johnnysshop 1 week ago
right by the clutch lever where the cable goes in, like next to the screws. you know how it all those slits line up so the cable can slide in? the last slit on mine is not lined up at all. its turned all the way around. i tried loosening it and turning it with pliers but it wont turn. got any idea?
motovance 2 months ago
@motovance Could be cross threaded or just stuck. Also the cable could have a lot of tension on it. Try to take some slack off the cable then try to spin it.
Johnnysshop 2 months ago
My clutch o my yz 125 is really stiff, idunno if its time to change or what, any help?
MrYammy4eva 3 months ago
@MrYammy4eva Check the cable. Could be a new one or need lubed.
Johnnysshop 3 months ago