alcoolaid's 07 STI 0-120

First part was getting used to how the car launches. Couldn't really put the power down and shifted to 2nd too early. Second part didn't give it it enough gas. Still on stock axles so didn't want to push it too hard.

0-120mph pull. 0-200 km/h for my fellow Canadians.

Borg Warner Airwerks S300sx 83/75 Twinscroll T4 turbo.

28 psi on 94 pump gas + 50/50 water meth injection.

511whp and 444wtq.

265/35/18 RE-01R tires.

Category:

Autos & Vehicles

Tags:

• subaru
• impreza
• wrx
• sti
• 0-200
• 500whp
• borg
• warner
• s300
• 28psi
• turbo
• boost

[scoobyjdmd]

Hey man, its scoobyjd from nasioc. Do you have any head work done? And where are you located to get 94, we only have 93 in my area.

[alcoolaid]

@scoobyjdmd i have port and polished heads, valve springs, kelford 276/272 cams, ferrea valves +1mm valves.

but this video was done on stock heads

[kyleisreallycool]

you neeed 2 step

[alcoolaid]

@kyleisreallycool i have it. see other videos

[brentwiththewrx]

Oh I take that back then, throw some GSC S2's in the mix and that'll bring it up for sure. What's done to your bottom end?

[alcoolaid]

@brentwiththewrx i put in kelford 276/272 cams about a year ago now.

bottom end is 99.75mm cp pistons, carillo rods, calico coated acl race bearings, stock crank, balanced, etc..

[alcoolaid]

@xADAMxSTix

your turbo makes peak torque way down low since the stock turbo is tiny. if i try launching at 4200 i'm just gonna bog. my peak torque is near 5500rpm

[11miksti]

dont pay attention to rpm. memorize mph for each gear. atleast for 1st to 2nd change. from there get your flat foot shift 2-3 -4- ... get your fukn car tuned! my old 07 stage 2 catless invidia dp was makin 340 by 2500rpm! world of a difference. If you live in the Los Angeles area go to a place in santa clarita Yimi Sport tuning. talk to Paul Leung, and tell him " The White Mexican" or " enchilada MIke" sent you.

[DeekoWeeko]

It was early to change into 2nd gear! you killed that!

Nice video... keep it up!

[Subi06STi]

Are you running stock block or what do you have?

[ricecakes13]

@scoobyjdmd chevron sells 94

[brandontoscano]

How much hp and torque can a stock sti block handle?

[scoobyjdmd]

@alcoolaid Those are some really nice numbers for no head work!

[canthony1019]

Good idea on not pushing it too hard on stock axles.. i learned the hard way in my 626 rwhp 325i last summer.. built it up and didn't push it hard but one time after the dyno and bent one cv axle, shattered the joint, and bent my main axle on launch..

[silvergate3909]

strong car. good work mate.