Gi milsim 50 cal test #2
Loading...
Uploader Comments (trashbear1977)
All Comments (13)
-
They should create a new sport called "Rockball." Everyone shoots either rocks or Monster Ball. Everyone also dies.
-
you cant use monster ball in any kind of legit test of anything paintball related.
-
interesting...
-
I was not rying to be rude but!! I just wanted you to give each of the balls a fair shot in regards to size. If you take the ball and start measuring at the seam and slowly rotate the ball while adjusting your micrometer until the ball just falls through the jaws you will find the largest point of the ball. The pole of the ball is much easier, you just have to keep the ball straight as you pass it through your micrometer, when it just slides through you have your measurement.
-
I was just trying to correct your method and it is wrong. In order to get the true largest point on the ball you have to measure the seam all the way around until you find the largest point. Now unless the ball is blown the seam is usually 10 thousands larger than the pole.
-
it would be nice to see your data up on the screen as youtube annotations! thanks for doing that work!
9:02
GI milsim 50 cal testsby trashbear19779,028 views- 5:22
gi milsim vs monsterballby trashbear19772,881 views
- 1:01
.50 cal paintballs in the faceby Matteasy724,279 views
- 2:47
Facefull Magazine // .50 Caliber First Impressions...by Fac3fullMagazine2,768 views
- 0:54
G.I. Milsim - Sean Scott Netting Testby GIMilSim3,989 views
- 0:44
Interview with mike from techpbby Matteasy710,891 views
- 6:38
PunkWorks 50 cal intro and drop testby PunkWorksPaintball4,126 views
- 7:57
Richmond Italia on .50 Calby Munkamedia3,707 views
- 3:37
Information on the new .50 cal paintball revolutionby Matteasy73,811 views
- 2:38
PBL Product Spotlight: Eye Tactical - CM110by BUYPBL7,885 views
- 0:56
G.I. Milsim .50 Cal Air Efficiency Testsby GIMilSim14,718 views
- 6:56
50 cal testingby spyle25,023 views
- 5:37
50 Caliber GIMilsim Paint Data and Testingby painthappy8,953 views
- 4:20
mike from techpb gets hit by .50 cal paintballsby Matteasy733,806 views
- 9:25
Chris LaSoya (GI Milsim) talking about .50 caliber paintballby pblivetv17,711 views
- 1:35
Heroes For a Day: The XSV Storyby specialed32218,498 views
- 7:04
PSP World Cup 2009 Paintball Experience Extended Teaser 2 - HDby SocialPaintball141,579 views
- 0:36
G.I. Milsim - Paintball 2.0by BUYPBL1,222 views
- 1:06
.68 and .50 125 Foot Flight Time Testby PunkWorksPaintball3,856 views
Well I just watched the video again and you are not measuring them right. I do not care if you have been a machinist for 50 years you still do not know how to measure a paintball. Realize this!! A paintball is not perfectly round there is a large area called the seam and a small area called the pole. These are paintball terms. If you rotate the ball on the seam all the way around you will find the actual size of the ball. I know what it takes to make a ball and how to measure it properly.
mblwindenergy 2 years ago
I will re run the test measuring across the seam, but I am also going to use my fixture for checking roundness along with it.
this was all fresh paint and there were defiantly
balls that were larger off the seam then on it
trashbear1977 2 years ago
Where did you learn how to measure paint?? When measuring a paintball you measure it on the seam to find the largest part of the ball. You cannot just grab a ball and measure anywhere like you are!!!!!
mblwindenergy 2 years ago
I learned to Measure paint the same place I learned to measure everything else. in a Machine shop trade school. I assure you that I know how to check the diameter of a ball. I have been playing for 20 years and I have been a Machinist since 1995
trashbear1977 2 years ago
very informative information.
where did you pick up the GI 50 cal paint?
OperationMilsim 2 years ago
I got the paint from a friend of a friend for testing purposes
trashbear1977 2 years ago