2011 Dodge Challenger SE 3.6L V6 MagnaFlow Exhaust
Loading...
1,707
Loading...
Uploader Comments (Fox118Challenger2011)
see all
All Comments (9)
-
@frankyluis23 It's torque reduction during a shift.
-
Well looking at your 0 to 60 time at appears that it was around 7 seconds because you take-off at 1.29 min and hit 60 at 1.36 min. I think your low end might require that you add some back pressure. you might be scavanging too much fuel with that type of exhaust configuration. I could be wrong judging by the clock on youtube plus the speed of the footage but that is the case you could be running slower ant right at 6.4 seconds. Still not an improvement from the stock exhaust.
-
thank you
-
awesome sound! Thats the sound of $25000!
Loading...
I don't know if you realize this but when you gun it the exhaust makes a fart sound in between 1st and 2nd gear. This also happens in between 2nd and 3rd if your heavy on the throttle. This can be happening for 2 reason, 1 in between gears your fuel gets cutoff in certain cylinders to reduce torque when shifting gears or 2 your not keeping enough back pressure in the exhaust system and much of the excess exhaust is being dumped during gear change. Put in some glass packs in the rear, should help
frankyluis23 8 months ago
@frankyluis23 Yeah, I noticed it but it doesn't really bother me though. It only does it when I floor it, which I do not do very often. Thanks for the tip though, I may look into it sometime.
Fox118Challenger2011 8 months ago
I have the same car, but I can't see the digital speedo like yours. Is it in he setting somewhere? I have looked all over it...lol. Thanks. Mine has the weather there.
mrjlwilliams 8 months ago
@mrjlwilliams with engine running and temp. displayed on the screen hold the up arrow for 10 Seconds then release quickly hold the down arrow until it pops up... you will have to do this everytime you start your car if you wanna use it
Fox118Challenger2011 8 months ago 3