PicooZ Pulley Drive

I remodeled PicooZ to the Pulley drive.It's very silent.
However,Because the power loss is large, the performance is insufficient yet.

Category:

Howto & Style

Tags:

• PicooZ
• PiccoZ
• RC
• ハニービー

[gadjetp]

Ok.

I reversely changed the connection of the motor.

[luke559933]

okay, youv'e proved it's silent...but lets see some more shots of it flying?

[gadjetp]

This is still an experiment.

The power to fly doesn't suffice in the current state.

The power loss by the tension of the belt is large.

It slips when the tension is weak.

I think that the introduction of the exchange for a stronger motor or the timing belt

is necessary.

[planklanHD]

that is called a flight? WTF ,...

[djdavies83]

if you still use this then inverting the frame might help, i've heard running the motor backward burns it out.

connect the motor as it was,

slide off the bit on the bottom of the shaft,

slide the shaft on blades out,

take of your pully,

put collar back on shaft,

shaft back in from the bottom,

add pully at what was the top of the frame,

pop out tail rotate by 90deg.

inverting the frame changes direction, with your pully changing the direction back.

[Xx11HaloGuy11xX]

Nice mod!. What exactly does this do? Im not tryin to be an ass either im just just curios.

[loniedude]

tip for u mate (u probs already know this) try changeing the gear ratio so that you can gain back the power lost

[erdisrac]

Can it fly normally? And where you get those parts?

[stikky2]

all yuo need is e tial

[quadbassblaster]

hahahah !! put the camera more BACK ! u cant even fly it without crashing it 20 times., hehehe that part was sooo funnyy.,., wweeeeeeeeee.,., smash !

[dwarfonomic]

hey maybe you must get a smaller ring on the rubber band

then it must have more power

[MTheoryStudios]

It does have enough power. All you have to do (This only works with the STOCK tail rotor mount) is very gently, using a Swiss Army Knife or similar, push the tail rotor into the housing a bit more. If the helicopter spins in the other direction, push it out a bit, and visa versa.

[mgsisbest13]

looked kinda funny with just the motor and not the base of the chopper