Ford 7.3L IDI Burnout
Uploader Comments (CustomDieselINC)
All Comments (15)
-
where did you find the custom K&N air instake???
-
@CustomDieselINC 9* at what rpm? I set mine at 7.9* at 750rpm
-
@12gauges The stanadyne pump used in the 6.9s won't flow as much fuel.. and DPS sells a "race quality" pump, if you are cheap, you use the later 1700psi pump with earlier 1400psi injectors.
-
what's the fucking fuel consume on that thing?
-
There was more smoke from the exaust then the tyres.... -_-
-
@evo8mrman i've worked on plenty of pre-powerjoke idi's.
-
@jmanwild u havent seen a pre powerstroke idi there dip.
-
@sycostang67 i hope your joking
ive seen 7.3s at 30psi on stock studs without isues
-
have you had any badluck out of your dps injectors?
-
Nice truck, but if you are pushing 18psi, I hope you have head studs. 15psi is really pushing a 7.3 with stock bolts, a set of ARP studs will keep the heads on the motor and out of your lap.
ive got the timming advanced 9* pump maxed out a set of DPS Inectors and im running roughly 18PSI of boost. i have a full 4" dual MBRP exhaust and a custom K&N Air Intake. ive got a new set of 33x12.5x16 BFG M/T K2 Tires on the same rims. the rims look horrible in this video all faded but when i polish them there shiny like hell. thanks for the comment.
CustomDieselINC 1 year ago