HALP-24-2L-LED Class I, Division 2 LED Light - 2 foot, 2 lamp - Corrosion Resistant (Saltwater)

Made in the USA

The Magnalight HALP-24-2L-LED Hazardous Area LED Light Fixture is U.L. approved Class 1 Division 2 Groups A, B, C and D - UL 1598A listed and ideal for open air hazardous locations where flammable chemical/petrochemical vapors may be occassionally encountered.

The HALP-24-2L-LED fixture is a 2 foot long, 2 lamp, UL listed Class 1 Division 2 Groups A, B, C and D hazardous area LED light and a good choice for use in applications where space is at a premium. This fixture is T4C temperature rated and comes standard with our high power and efficiency 15 watt LED lamps. This weatherproof fixture is constructed of non-corrosive materials including a polyester housing reinforced with glass fiber, a poured in gasket for reliable sealing and an impact resistant acrylic diffuser. Corrosion resistant stainless steel latches secure the lamp cover to the housing and provide a firm lock against the poured in seal to prevent drips and water intrusion. This fixture is UL 844 rated Class 1 Division II, Groups A, B, C, D approved and also carries a UL 1598A outdoor marine rating and meets US Coast Guard specifications. This fixture ideal for hazardous areas where corrosion resistance is mandatory and space limitations require a compact lighting solution.
We have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight, and helps this LED fixture maintain a T-4C temperature rating. The solid state design of the LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T5-bulbs. The 15 watt LED lamps produce more illumination than standard T5-HO bulbs, but draw only 1/3rd of the current. The LED bulbs used in this fixture are our LED T series 15 watt T17 lamps which produce 15% more light than standard T5-HO bulbs when measured from eight feet. This fixture is multi-voltage capable (not multi-tap) and works on the following voltages: 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ, 277 Volts 60 HZ. We also make a 12-24V DC version for low voltage applications (-LV suffix).

Standard Flange Brackets: Standard Flange Brackets: Flange type stainless steel mounts attached at each end of the fixture enables it to be simply secured to any surface. The mounts provide some shock absorbency protection while enabling the user to simply mount the fixture with the through-hole taps that protrude on each side of the fixture. The mounting holes are 36 9/16 inches on center apart along the top of this hazardous location light. The mounting holes are 7 inches on center across the top of the light.

Suggested Applications: The HALP-24-2L-LED is designed for marine wet and damp locations, where corrosion resistant lights are required. This includes petrochemical facilities, lubrication pits, oil drilling rigs, crew quarters, solvent/cleaning areas, water treatment areas, processing plants and marine loading docks.

Category:

Autos & Vehicles

Tags:

• fluorescent light
• corrosion proof led
• led light
• explosion proof led