Cylinder Head Replacement Part 1
Loading...
Loading...
14,288
Loading...
Uploader Comments (richpin06a)
see all
All Comments (31)
-
@richpin06a Ok so after i do a demo and put everything back together i can start the car back up even if its at tdc
-
@OneDayHenry Yes but be careful you can bend the valves in the head.
-
Awesome!
Thanks for the reply!
Oh, if the timing belt is busted, will the crank still turn over?
-
@OneDayHenry Would you believe a little Samsung TL105
Loading...
10:13
Cylinder Head Replacement Part 2by richpin06a36,008 views- 3:26
worst mechanic everby josebean19101,419 views
- 1:13
2000 Ford Explorer v6 4.0 liter engineby crbastian9,417 views
- 0:38
Girl Sucked Into Car Blowerby jason917112,301,846 views
- 9:12
Lakeby Jacquisha6,371,455 views
- 0:20
What I used to temporarily fix the head gasketby blackhawk842711,950 views
- 7:20
How to Replace Blown Head Gasket on a 2004 VW Jetta 2.0L Engine (Part 2 of 2)by YeechBlitz30,767 views
- 0:57
VW Passat 2.8 V6 193KM 4Motion - vw-passat.plby marcin363615,674 views
- 9:38
replacing the head gasket in a chevy cavilier 2.2 liter 4 cylinderby REDPWR4EVR34,431 views
- 1:11
Under hood signs of a head gasket failureby briansmobile1176,662 views
- 3:42
Fixing Tough Head Gasket Leaksby scottykilmer96,857 views
- 1:06
How to tell if your head gasket is blownby AskTheMechanicCoUk17,239 views
- 2:43
Hilarious Commerial!!by slim2open35,731,707 views
- 10:23
Part 1 - How to remove cylinder head from KA24DE 240sx S13 S14by S13xCrazy29,714 views
- 0:22
Block Honingby carpartsmachine106,575 views
- 5:06
Cylinder head removal 2.3-16 for inspection and repairby Rocketjbob112,066 views
- 8:29
Does Stop Leak Work?by EricTheCarGuy91,807 views
- 1:58
Flow Testing a Cylinder Head (Part 2)by ShortBlockCharlie7,026 views
- 10:10
5.4 Lincoln Navigator cylinder head removalby 2012nugget2,518 views
- 1:03
head gasket and timing chainby maxnguyen2225,081 views
Very well detailed sir :) I might copy your list if I ever need to remove the head on my 91 SW but so far this engine is behaving good with only 72k miles. (knock on wood).
RigsPGT 1 week ago
@RigsPGT I am put up a video on a 99 SL1 head R&R very soon so stay tuned.
richpin06a 1 week ago
So what's the point of setting tdc before you take the head off, could you not wait until you can see the #1 piston on the rebuild and set it then
honda12racingcbr 2 months ago
@honda12racingcbr If you are replacing the head you would not have to.
richpin06a 2 months ago
rich if i put the engine on tdc just to do something after i finish that do i have to rotate it back down to start or it dont matter.
hp11208 2 months ago
@hp11208 Let me get this straight the timing belt is on correctly and you rotate the engine to TDC then you want to know what to do after you check your marks.You do not have to do anything if everything looks ok you can leave it at tdc if you like.
richpin06a 2 months ago