Tecumseh 5hp Carb rebuild Pt 2
Loading...
Uploader Comments (RedneckRickem)
All Comments (30)
-
I am working on a carb similar to this one. I saw one video mentioning the main venturi, whatever that is. I have reopened the holes in the screwn that holds on the float but, and have cleaned out any guck I can find. However, I do not have a rebuild kit, so I am just tapping back in the same disk that I took off inside the tub and will give it a try. If I don't have a rebuild kit, do these cleanups help me? Thanks. KK
-
i like briggs a lot better lol it not as complicated
-
I like the way you explained how to clean the Carburator. I might have to do that on my generator which is difficult to start.
-
hey thanks for the video this is great, my carb is a little differnt it has a red primer on it how do it come off thanks
-
JB Weld works good for holes in float bowls.
-
Your old lady is going to be pissed.
Carb cleaner smelling up house for days.
-
i need some help with my tecumseh carb woul you help me out thank you
-
hey, i just cleaned and rebuilt the carb on my 5hp tecumsh, now i can't find the adjustments for the carb, you wouldn't happen to know them do you??
-
The Bottom needle in the bowl I blow in it and adjust the needle until it just turns off. I can't blow any air then a touch more.
Thank you so SO much for sharing your knowledge.
Peace....Love your accent too.
-
Good job and thanx!
10:01
Tecumseh 5hp Carb rebuild Pt 1by RedneckRickem47,005 views- 13:47
In Memory of RICKEM R.I.P.by RedneckRickem59,859 views
- 1:34
Trip to Laserby RedneckRickem2,827 views
- 2:18
Re: Davesfarm in Jailby RedneckRickem73,179 views
- 9:58
HOW TO REBUILD Carburetor on 4-5HP Tecumseh Snowblower Engine Part 3/3by donyboy7320,430 views
- 3:22
The End of the Tecumseh Engineby SmallEngineMechanic34,783 views
- 3:11
8-11hp Tecumseh Carburetor Linkage Configurationby donyboy7325,401 views
- 5:37
HOW TO Remove & Clean Fixed JET on Snowblower Carburetorby donyboy7345,285 views
- 9:29
Tecumseh Snow King Carburetor Repair Video on Troy-Bilt Snow Blower part #5by 31pockets20,938 views
- 1:34
My 5.5 HP Tecumseh For my Go Kartby PlatniumProductions18,367 views
- 4:42
HOW TO Clean & Rebuild Tecumseh Snowblower Carburetor PART 1 OF 4by donyboy7351,946 views
- 2:17
Tecumseh 10hp engine running smoothby kiarra0041,754 views
- 9:10
Tecumseh diaphragm carb rebuild part 2by sixtyfiveford8,356 views
- 9:14
Tecumseh Snow King Carburetor Repair Video on Troy-Bilt Snow Blower part #3by 31pockets21,904 views
- 7:59
Re Build the Tecumseh(part1)by KeepOnTruckin204719,925 views
- 6:10
HOW TO REBUILD Carburetor on 4-5HP Tecumseh Snowblower Engine Part 2/3by donyboy738,414 views
- 9:43
Snowblower Tune-up (Tecumseh 5.5 hp) Part 2by mikesequiprepair34,624 views
- 4:42
Tecumseh 5HP Snowblower Engine Old Start Cold Startby craig19744,412 views
- 1:01
Leaking Tecumseh Carbby Tech8HP3,601 views
hey rick i got a carb just like that and the adjustment screw that goes in the bottom and holds the bowl on snapped in two and plus the floa has a hole in it. so where can i get the replacement parts and about how much if u know
bigandrich22 2 years ago
Not sure in the US. Here, I go to Laser Power.
RedneckRickem 2 years ago
Rick, in the first vid, I thought I saw an O-Ring around the main jet nozzle that screws into the bowl. I didn't see that on the new main jet, did it not come with the kit?
Ajaces 3 years ago
It doesn't have one. This style of bowl nut has two recessed areas, each with a fuel hole in it.
RedneckRickem 3 years ago