DJI NAZA FAILSAFE ADJUSTMENT
Loading...
Loading...
0:43
DJI Naza motor cut off ATTI modeby irishkendoll962 views- 1:28
DJI NAZA new firmware (12-28-11) test flying in confined spaceby irishkendoll2,352 views
- 1:24
DJI Naza "Manual" flight mode & "intelligent" battery cutoff selectedby irishkendoll792 views
- 10:55
DJI Naza OPEN Box review ( PART 1 )by irishkendoll1,643 views
- 8:16
DJI Naza FC First Fligthtby stockfoodpics1,086 views
- 3:57
Dji Naza Fast flight Stability test, Filming with sony nex5n 18-55 lens.by sharetime11,365 views
- 3:26
DJI 450 Flame Wheel buildby TheDroider3,605 views
- 1:58
Daylight Maiden flight of X650 V4 DJI NAZAby dmkellett1,661 views
- 0:51
Landing Fail Save Test - DJI x MK x FY91Qby viniciusfantini1,919 views
- 0:18
DJI Naza on VC-450 Auto Landingby helipilot7271,175 views
- 3:11
www.cnchelicopter.com DJI F450 with NAZA FC Air pressure fixed height Testing Aby cnchelicopter3,186 views
- 5:17
Naza Dji Réglages sur PC Premiers pas ;by rculone1,473 views
- 1:50
DJI Naza "Uncovered"by irishkendoll2,038 views
- 1:20
HEXACOPTER-NAZA CRASHby Av8Chuck1,954 views
- 1:06
DJI Naza test 3by jiljik3234,318 views
- 3:04
NAZA & UAP-1 Hexacopterby Av8Chuck920 views
- 2:43
Altitude TEST Naza Dji hobbyby rculone1,599 views
- 5:27
Waynes's Apache DJI WooKong Stablizer build and test 1by HCRCMFlying1,103 views
- 2:12
Daylight test flight of x650 DJI NAZAby dmkellett515 views
@xtremeink69 Apparently not, I had some ones from a local hobby shop (8000Hz). I even removed the red (positive) wires from the ESCs, and it still caused the NAZA to malfunction and I had to return it. So you need ESCs for quad copters, such as OPTO.
MCurriePhotography 2 weeks ago
@xtremeink69 It recommends a 400Hz ESC or above, this makes it quicker to process the info coming from the NAZA. I just bought some ESCs from a local hobby store, waiting for my NAZA to come in to see if they're okay.
MCurriePhotography 1 month ago
hi there. just got a f450 and a naza can you tell me if you know that is... can i use any make of esc with naza
xtremeink69 1 month ago
@vvvsk you can actually set the manual ang atti mode via gear switch and failsafe via axu2 switch. Failsafe can also be triggered when you turn off the radio or you lost signal but the qaud still hovering. But make sure set up the failsafe between 20-40% depending on the payload. Mine is almost 2kg so I put 38% failsafe and the qaud will land straight very slowly.. but the problem if there's a wind it will drift away.. lolz!
dazh 1 month ago in playlist Uploaded videos
Thx so much for this solution, it made my day!
nutzername6969 1 month ago
Thx for this one! got the same problem and it realy helped me
nutzername6969 1 month ago in playlist Uploaded videos
Can I ask Why did you deactivate failsafe? I though is better to have failsafe active. If you accidentally lost signal, your x copter still should be hovering... Or I'm not right?
vvvsk 1 month ago
hello i buy dji naza kit f 450
i have problem with driver instalation. if i want instal driver on my
pc, windows write ,,The current language is not suooirted by the
device driver installation wizard.i have slovak windows xp.i triyng
install manual by device wizard, winn still write usb device is not
recognized.
pleasecan you helpme?
somro 1 month ago
how you conect naza to pc? because my pc write usb device Not recognized
somro 1 month ago