Bedini: producing something useful.

Shows whats coming off the generator

Category:

Science & Technology

Tags:

• Bedini
• Motor
• Energy
• Generator
• Technology

[Drevtoobe]

I made reference on your other clip how adding the load with the tiny slot-car motor slowed the rotor down. The same thing her applies with the LEDs. You noticed a marked difference in the trimpot effects on the motor with the LED load. This shows you how your motor has very little torque (like most pulse motors) and with the LED load drag on the motor it really slowed down. That is a viscous circle for pulse motors because you get less pulses, hence less power, slowing it down more, etc.

[Pwordchernoir]

however it responds the same without a load taken from the generators.

[peper0110]

Good work man!!

For improuvement look at sephiroth new ecperiment..He put a choke on the trigger

coil and it's work great!!

You coul'd use this too.

peper10

[Pwordchernoir]

choke? ive seen something similar on introvertabrates videos. He is using an inductor coil on the trigger side to effectivly reduce energy consumption. Is this what you mean? can u post the link to the video?

[theantirobot]

Someone please make a movie about a free energy device being shown on youtube, replicated, and then spreading world wide 8 weeks later. Fossil fuel's are completely abandoned by the end of the first year.

[Pwordchernoir]

It is only a matter of time. Many of us on youtube are working hard on many different energy concepts. Some may turn out to be no more then educational experiments but it is more likely one of us will succeed. In that respect, cheers for the idea, i make films!!!

[Drevtoobe]

In another posting I mentioned the wiring for your transistor firing circuit and how you should keep all of those wires neat and tidy.

In fact, you should do more than that. The components and circuitry for the transistor circuit should be all in one place as close to the pulsing coil as possible. Your fancy potentiometer should be changed for a conventional pot and placed as close to the transistor as possible, all related wires should be as short as possible.

[Drevtoobe]

For this clip, nice to see a real output driving the LEDs. As a general comment, you would be better off using incandescent bulbs or ordinary resistors as a load instead of LEDs. That's because LEDs clamp the voltage across their two terminals, acting as a non-linear load. They will start to look like a short-circuit, line any diode would.

[Drevtoobe]

Hey there, I faithfully looked at all of your video clips and I think that I understand how your motor works. I am going to jump back a few of your clip postings and make some comments starting there.

[introvertebrate]

I'm sephiroth on the energetic forums :D

I agree with peper0110 that the choke/coil on your trigger side may benifit your motor. I believe that this will benefit light/small rotor ssgs with multi coils. I think it has to do with the torque/weight ratio.