Intel E2140 overclocked 1.6Ghz to 3.12Ghz on Intel P35 MB

Visit my Blog: http://www.itbangbang.net
Intel Dual-Core E2140 CPU overclocked from 1.6GHz to 3.12Ghz with 0.1Volt increase. This was done with stock cooling on a Gigabyte GA-P35-S3G motherboard.

Category:

Science & Technology

Tags:

• overclock
• overclocking
• overclocked
• intel
• dual-core
• core
• duo
• E2140
• CPU
• gigabyte
• P35
• chipset
• GA-P35-S3G
• sisoft
• sandra
• cpu

[phillip8739]

I can overclock the fsb a bit on my G41 asus, I get to a FSB of 265 max, anything after that is unstable. help? I have thermaltake frio and temps never go over 35c at 100% load

[jggonz]

@phillip8739 On a G41 you're fighting against the onboard graphics (even if it's disabled, it can cause problems). My tip is to lower the RAM speed if possible. Increase cpu voltage if possible. Lower the memory to cpu speed.

[RaTzzUscAA]

1,6 dual core= 3,2 ghz?

[jggonz]

@RaTzzUscAA No. 1,6GHz dual core overclocked to 3,12Ghz dual core

[cezudas]

@ jggonz

PLease tell me what psu did you use// thanks :D

[jggonz]

@cezudas It doesn't matter what PSU you use. I used an old 200W power supply I had laying around.

[phillip8739]

@jggonz when I O/C my fsb my ram goes to 1040mhz instead of 800 normal FSB rate..

[phillip8739]

@jggonz My GPU is a NVIDIA 9500GT .. Onboard graphics have never been used with this board.

[franek57100]

@jggonz Bomba!

[TheKlosari]

I have GA-945-DS3 and same proc as you .

I know my mobo limits FSB but can i raise it atleast to  2.5 ghz with minimal volt increase with stock cooling ? Give me your contact so you can help me :D

[WizardsMagic007]

Funny my neighbor just through way a motherboard and CPU exactly the same as in your video. I got mine to 3ghz on stock cooling, at 1.264v with 8gb of ram!