Fiero V8 burnout 2

Another LS4 Fiero burnout, sorry about bad quality, need new camera.

Category:

Autos & Vehicles

Tags:

• Fiero
• V8

[psychoninja911]

Well shoot. Not bad. That's about how much you end up spending on the 3800sc. What is the v8 and axels from? And by any chance have you clocked your gas mileage?

[welditrick]

@psychoninja911

Do you get and entire wire harness bumper to bumper with entire dash, gauges, 6 disc radio, HVAC controles, steering wheel and columb and a crate full of stuff for the $2,000 3800? I could activate the sat radio If I wanted it and I LOVE the remote ketless entry and remote start with auto climate control that I now have in my Fiero.

[welditrick]

I get 25 mpg average from tank to tank calculated at the pump.

I used the LS4 axle set and did some mixing and matching to fit them to the Fiero.

[sonnych69]

what tranny are using

[welditrick]

@sonnych69

The 4T65EHD that the engine came with in the 2006 Monte Carlo SS. It is a 4 speed auto.

[caddy8436]

Hey who did your interor? U picked the right motor for ya swap. The Northstar is a great motor IF u get 1that had the matenace done at the right place/on time. If not it can get REAL expensive Real quick. And not enough speed parts. Nice swap.

[Silkmaster4200]

I motor is in the back and the fenders has flares too. Looks not bad for a fiero lol. I would want to pay the gas he said. On the highway it takes about 12mph per gallon lol.

[Silkmaster4200]

The V8 LS4 is it all aluminum anyway ?. Shouldn't be that heavy. Well u think anyway. It's only 5.3L or 327 CI V8. I saw one with a 502 Bigblock V8 into a Fiero. Custom parts for doing that. But it works good. It's street legal. But the guy said he mostly drags it. I said how fast for the drag strip ? 5.8 sec. I said pop your hood. So he did and there's two turbos and plus other stuff too. It has corvette rimes too. He also said it has some drive chain into it. Most be axles i think lol.

[welditrick]

@psychoninja911

Why V8? Well it was VERRRY cheap. I did not add up the cost but off the top of my head I would say I put $2,000 in it to get it running.

It sounds better than the 3.5 Twin Cam all aluminum V6 I had in it and has more power. It is more fun to drive with the V8 too.

The axles are the factory V8 stuff.

[psychoninja911]

@welditrick Why go v8 when there still aren't that many tough axles available for the torque the v8 is going to put on the back of that car under the engine weight.

I'd just stick to the v6s that are giving just as promising results with turbos, good gas mileage, and decent sound... Unless it's a v8 gotta have it for big wiener type thing.